| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HCL DFXServer is affected by an Unencrypted Communication vulnerability. The application permits users to establish connections over unencrypted channels via the HTTP protocol, which could allow a remote attacker to intercept network traffic and expose sensitive data transmitted between the user and the application. |
| ruby-jwt is a Ruby implementation of the RFC 7519 OAuth JSON Web Token standard. Prior to 2.10.3 and 3.2.0, JWT.decode(token, '', true, algorithm: 'HS256') accepts an attacker-forged token because OpenSSL::HMAC.digest('SHA256', '', payload) returns a valid digest under an empty key and no empty-key precondition exists in the HMAC algorithm. The same path is reached when a keyfinder block or key_finder: argument returns an empty string, nil, or an array containing nil for an unknown key, affecting HS256, HS384, and HS512 verification through JWT.decode and JWT::EncodedToken#verify_signature!. This issue is fixed in versions 2.10.3 and 3.2.0. |
| Unauthorized use of Kyocera printers, allows all information stored in the Kyocera address book to be exported. The security measure that encrypts incoming data ian be bypassed with this vulnerability, allowing encrypted data to be decrypted. Passwords and other sensitive information can be obtained. This affects Kyocera Command Center RX TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 2553ci, TASKalfa 3253ci, TASKalfa 3554ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 7052ci, TASKalfa 8052ci, TASKalfa 7353ci, TASKalfa 8353ci, TASKalfa 2554ci, TASKalfa 3254ci, TASKalfa 505. |
| UltraVNC through 1.8.2.2 uses inadequate cryptography in the MS-Logon II authentication scheme (rfbUltraVNC_MsLogonIIAuth). In rfb/dh.cpp the Diffie-Hellman key exchange is performed with parameters that fit in an unsigned 64-bit integer (DH_MAX_BITS controls the prime size). A 64-bit DH key can be broken by Pollard's rho algorithm in under one second on current hardware. Additionally, the private exponent is generated by the rng() function, which multiplies three libc rand() values seeded from time(NULL). With approximately 31 bits of internal state and a time-based seed, the private exponent is recoverable in under a minute by a passive observer. A network attacker who can observe the MS-Logon II handshake (via sniffing, recording, or man-in-the-middle) can derive the shared DH key and decrypt the encapsulated username and password, resulting in full credential disclosure. This affects legacy MS-Logon II connections; MS-Logon III (X25519 + AES-256-GCM) is unaffected. |
| The encryption algorithm used to protect the configuration of user accounts, stored in the built-in user directory of PcVue projects, all versions prior to 17.0.0, is not strong enough for the level of protection required. A local attacker could alter the existing configuration and ultimately gain privileged access to the PcVue application. |
| An issue was discovered in Mbed TLS 3.5.x before 3.6.0. When an SSL context was reset with the mbedtls_ssl_session_reset() API, the maximum TLS version to be negotiated was not restored to the configured one. An attacker was able to prevent an Mbed TLS server from establishing any TLS 1.3 connection, potentially resulting in a Denial of Service or forced version downgrade from TLS 1.3 to TLS 1.2. |
| Version 3.0.7 of the Securly Chrome Extension exposes multiple publicly accessible endpoints that allow unauthenticated access to sensitive data. The exposed information consists of SHA-1 hashes that are inadequately obfuscated using a simple Caesar cipher, which can be easily reversed to recover the original hash values and access the protected data. |
| CWE-326 in BOSH allows a local attacker to steal Basic-auth credentials or redirect UAA token requests via MITM. HttpRequestHelper#create_async_endpoint and #send_http_get_request_synchronous hard-code OpenSSL::SSL::VERIFY_NONE, enabling an attacker to intercept traffic between bosh-monitor and the BOSH director or UAA and steal credentials.
Affected versions:
- BOSH: all versions prior to v282.1.9 (inclusive); fixed in v282.1.9 or later |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.9.5, deterministic AES-192-CBC with a fixed zero IV, constant KDF salt, and no MAC leads to confidentiality and integrity failures for synced bookmark/profile data. Attackers can crack common passwords across installs and perform undetected ciphertext bit-flips to alter config/bookmarks. This vulnerability is fixed in 3.9.5. |
| A Weak Password Requirements issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. The affected products use a numeric password with a small maximum character size for the password. |
| A CWE-326: Inadequate Encryption Strength vulnerability exists in Modicon M221 (all references, all versions) that could allow the attacker to break the encryption key when the attacker has captured the traffic between EcoStruxure Machine - Basic software and Modicon M221 controller. |
| Inadequate Encryption Strength vulnerability in TP-Link Archer C7 v5 and v5.8 (uhttpd modules) allows Password Recovery Exploitation. The web interface encrypts the admin password client-side using RSA-1024 before sending it to the router during login.
An adjacent attacker with the ability to intercept network traffic could potentially perform a brute-force or factorization attack against the 1024-bit RSA key to recover the plaintext administrator password, leading to unauthorized access and compromise of the device configuration. This issue affects Archer C7: through Build 20220715. |
| SHA-1 is not collision resistant, which makes it easier for context-dependent attackers to conduct spoofing attacks, as demonstrated by attacks on the use of SHA-1 in TLS 1.2. NOTE: this CVE exists to provide a common identifier for referencing this SHA-1 issue; the existence of an identifier is not, by itself, a technology recommendation. |
| The RC4 algorithm, as used in the TLS protocol and SSL protocol, has many single-byte biases, which makes it easier for remote attackers to conduct plaintext-recovery attacks via statistical analysis of ciphertext in a large number of sessions that use the same plaintext. |
| Note Mark is an open-source note-taking application. Prior to 0.19.4, no minimum length or entropy is enforced on the JWT_SECRET configuration value. The application accepts any base64-decodable secret regardless of size, including secrets as short as 1 byte. This vulnerability is fixed in 0.19.4. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 6.2.4, a critical authentication-bypass vulnerability in fast-jwt's async key-resolver flow allows any unauthenticated attacker to forge arbitrary JWTs that are accepted as authentic. When the application's key resolver returns an empty string (''), for example via the common keys[decoded.header.kid] || '' JWKS-style fallback, fast-jwt converts it to a zero-length Buffer, hands it to crypto.createSecretKey, derives allowedAlgorithms = ['HS256','HS384','HS512'] from it, and then verifies the token's signature against an empty-key HMAC. The attacker simply computes HMAC-SHA256(key='', input='${header}.${payload}'), which Node accepts without complaint — and the verifier returns the attacker-chosen payload (sub, admin, scopes, etc.) as authentic. This vulnerability is fixed in 6.2.4. |
| In Meari IoT SDK image handling (libmrplayer.so) as observed in CloudEdge 5.5.0 (build 220), Arenti 1.8.1 (build 220), and related white-label apps (<= 1.8.x), baby monitor ".jpgx3" files use reversible XOR over only the first 1024 bytes with a predictable key derivation model. |
| ELBA5 5.8.0 contains a remote code execution vulnerability that allows attackers to obtain database credentials and execute arbitrary commands with SYSTEM level permissions. Attackers can connect to the database using default connector credentials, decrypt the DBA password, and execute commands via the xp_cmdshell stored procedure or add backdoor users to the BEDIENER table. |
| A vulnerability in Grafana Tempo exposes the S3 SSE-C encryption key in plaintext through the /status/config endpoint, potentially allowing unauthorized users to obtain the key used to encrypt trace data stored in S3.
Thanks to william_goodfellow for reporting this vulnerability. |
| Incorrect Privilege Assignment vulnerability in LiteSpeed Technologies LiteSpeed Cache litespeed-cache allows Privilege Escalation.This issue affects LiteSpeed Cache: from n/a through <= 6.5.1. |
