| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mashov – CWE-200: Exposure of Sensitive Information to an Unauthorized Actor |
| An issue was discovered in the Docusign API package 8.142.14 for Salesforce. The Apttus_DocuApi__DocusignAuthentication__mdt object is installed via the marketplace from this package and stores some configuration information in a manner that could be compromised. With the default settings when installed for all users, the object can be accessible and (via its fields) could disclose some keys. These disclosed components can be combined to create a valid session via the Docusign API. This will generally lead to a complete compromise of the Docusign account because the session is for an administrator service account and may have permission to re-authenticate as specific users with the same authorization flow. |
| An issue in the AsDB service of HI-SCAN 6040i Hitrax HX-03-19-I allows attackers to enumerate user credentials via crafted GIOP protocol requests. |
| An issue in INATRONIC com.inatronic.drivedeck.home 2.6.23 allows a remote attacker to obtain sensitve information via the firmware update process. |
| Sylius is an Open Source eCommerce Framework on Symfony. A security vulnerability was discovered in the `/api/v2/shop/adjustments/{id}` endpoint, which retrieves order adjustments based on incremental integer IDs. The vulnerability allows an attacker to enumerate valid adjustment IDs and retrieve order tokens. Using these tokens, an attacker can access guest customer order details - sensitive guest customer information. The issue is fixed in versions: 1.12.19, 1.13.4 and above. The `/api/v2/shop/adjustments/{id}` will always return `404` status. Users are advised to upgrade. Users unable to upgrade may alter their config to mitigate this issue. Please see the linked GHSA for details. |
| System logs could be accessed through web management application due to a lack of access control.
An attacker can obtain the following sensitive information:
• Wi-Fi access point credentials to which the EV charger can connect.
• APN web address and credentials.
• IPSEC credentials.
• Web interface access credentials for user and admin accounts.
• JuiceBox system components (software installed, model, firmware version, etc.).
• C2G configuration details.
• Internal IP addresses.
• OTA firmware update configurations (DNS servers).
All the credentials are stored in logs in an unencrypted plaintext format. |
| An issue in Zertificon Z1 SecureMail Z1 SecureMail Gateway 4.44.2-7240-debian12 allows a remote attacker to obtain sensitive information via the /compose-pdf.xhtml?convid=[id] component. |
| A Local File Inclusion vulnerability in Vegam Solutions Vegam 4i versions 6.3.47.0 and earlier allows a remote attacker to obtain sensitive information through the print label function. Specifically, the filePathList parameter is susceptible to LFI, enabling a malicious user to include files from the web server, such as web.config or /etc/host, leading to the disclosure of sensitive information. |
| An authenticated local user can obtain information that allows claiming security policy rules of another user due to sensitive information being printed in plaintext in Identity Agent for Terminal Services debug files. |
| An authenticated local user can obtain information that allows claiming security policy rules of another user due to sensitive information being accessible in the Windows Registry keys for Check Point Identity Agent running on a Terminal Server. |
| An information disclosure vulnerability exists in OneLogin AD Connector versions prior to 6.1.5 via the /api/adc/v4/configuration endpoint. An attacker with access to a valid directory_token—which may be retrievable from host registry keys or improperly secured logs—can retrieve a plaintext response disclosing sensitive credentials. These may include an API key, AWS IAM access and secret keys, and a base64-encoded JWT signing key used in the tenant’s SSO IdP configuration. |
| Arbitrary File Read in OpenText Dimensions RM allows authenticated users to read files stored on the server via webservices |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. Baremetal Operator enables users to load Secret from arbitrary namespaces upon deployment of the namespace scoped Custom Resource `BMCEventSubscription`. Prior to versions 0.8.1 and 0.9.1, an adversary Kubernetes account with only namespace level roles (e.g. a tenant controlling a namespace) may create a `BMCEventSubscription` in his authorized namespace and then load Secrets from his unauthorized namespaces to his authorized namespace via the Baremetal Operator, causing Secret Leakage. The patch makes BMO refuse to read Secrets from other namespace than where the corresponding BMH resource is. The patch does not change the `BMCEventSubscription` API in BMO, but stricter validation will fail the request at admission time. It will also prevent the controller reading such Secrets, in case the BMCES CR has already been deployed. The issue exists for all versions of BMO, and is patched in BMO releases v0.9.1 and v0.8.1. Prior upgrading to patched BMO version, duplicate any existing Secret pointed to by `BMCEventSubscription`'s `httpHeadersRef` to the same namespace where the corresponding BMH exists. After upgrade, remove the old Secrets. As a workaround, the operator can configure BMO RBAC to be namespace scoped, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces, and/or use `WATCH_NAMESPACE` configuration option to limit BMO to single namespace. |
| A vulnerability has been found in EnvaySoft FleetCart up to 4.1.1 and classified as problematic. Affected by this vulnerability is an unknown functionality. The manipulation of the argument razorpayKeyId leads to information disclosure. The attack can be launched remotely. It is recommended to upgrade the affected component. The identifier VDB-265981 was assigned to this vulnerability. |
| A vulnerability in the debug logging function of Cisco Duo Authentication Proxy could allow an authenticated, high-privileged, remote attacker to view sensitive information in a system log file.
This vulnerability is due to insufficient masking of sensitive information before it is written to system log files. An attacker could exploit this vulnerability by accessing logs on an affected system. A successful exploit could allow the attacker to view sensitive information that should be restricted. |
| A vulnerability in WooCommerce 8.1 to 10.4.2 can allow logged-in customers to access order data of guest customers on sites with a certain configuration. This has been fixed in WooCommerce 10.4.3, as well as all the previously affected versions through point releases, starting from 8.1, where it has been fixed in 8.1.3. It does not affect WooCommerce 8.0 or earlier. |
| An issue was identified in Fleet Server where Fleet policies that could contain sensitive information were logged on INFO and ERROR log levels. The nature of the sensitive information largely depends on the integrations enabled. |
| In Splunk Enterprise versions below 9.3.2, 9.2.4, and 9.1.7 and versions below 3.2.462, 3.7.18, and 3.8.5 of the Splunk Secure Gateway app on Splunk Cloud Platform, a low-privileged user that does not hold the “admin“ or “power“ Splunk roles could see alert search query responses using Splunk Secure Gateway App Key Value Store (KVstore) collections endpoints due to improper access control. |
| An issue in Automatic Systems Maintenance SlimLane 29565_d74ecce0c1081d50546db573a499941b10799fb7 allows a remote attacker to obtain sensitive information via the Racine & FileName parameters in the download-file.php component. |
| The gh cli is GitHub’s official command line tool. A security vulnerability has been identified in the GitHub CLI that could leak authentication tokens when cloning repositories containing `git` submodules hosted outside of GitHub.com and ghe.com. This vulnerability stems from several `gh` commands used to clone a repository with submodules from a non-GitHub host including `gh repo clone`, `gh repo fork`, and `gh pr checkout`. These GitHub CLI commands invoke git with instructions to retrieve authentication tokens using the `credential.helper` configuration variable for any host encountered. Prior to version `2.63.0`, hosts other than GitHub.com and ghe.com are treated as GitHub Enterprise Server hosts and have tokens sourced from the following environment variables before falling back to host-specific tokens stored within system-specific secured storage: 1. `GITHUB_ENTERPRISE_TOKEN`, 2. `GH_ENTERPRISE_TOKEN` and 3. `GITHUB_TOKEN` when the `CODESPACES` environment variable is set. The result being `git` sending authentication tokens when cloning submodules. In version `2.63.0`, these GitHub CLI commands will limit the hosts for which `gh` acts as a credential helper to source authentication tokens. Additionally, `GITHUB_TOKEN` will only be used for GitHub.com and ghe.com. Users are advised to upgrade. Additionally users are advised to revoke authentication tokens used with the GitHub CLI and to review their personal security log and any relevant audit logs for actions associated with their account or enterprise |
