| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
ubsan_epilogue+0x10/0x48
__ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
cpc_write+0x4d0/0x670
cppc_set_perf+0x18c/0x490
cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
... (trimming)
Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.
tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct
(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)
Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - remove unused character device and IOCTLs
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA
mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating
software state and skipping hardware offload setup.
That path jumps to the common success label before taking the eswitch mode
block. After tunnel-mode validation was moved earlier, the common success
label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs,
this decrements esw->offloads.num_block_mode without a matching increment.
Return directly after installing the acquire SA offload handle, so only the
paths that successfully called mlx5_eswitch_block_mode() call the matching
unblock. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
The register-based PARTITION_INFO_GET path trusted the firmware-provided
indices when copying partition descriptors into the caller buffer.
Reject inconsistent counts or index progressions so the copy loop cannot
write past the allocated array.
(fixed cur_idx when exactly one descriptor in the first fragment) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix MLE defragmentation
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
ad_sigma_delta_clear_pending_event() falls through to the status register
read path for devices with has_registers = false and no rdy_gpiod. For
such devices, ad_sd_read_reg() skips the address byte entirely and clocks
raw MISO bytes with no address phase — making it byte-for-byte identical
to reading conversion data. If a pending conversion result is present,
this partially consumes it and corrupts the data stream for the subsequent
ad_sd_read_reg() call in ad_sigma_delta_single_conversion().
Furthermore, with num_resetclks = 0 on these devices, data_read_len
evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set
and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to
SIZE_MAX and corrupting the heap.
Fix by returning 0 immediately when neither rdy_gpiod nor has_registers
is set. This is safe for all current registerless devices: ad7191 and
ad7780 (with powerdown GPIO) are reset between conversions by CS
deassertion, so there is no stale result to drain; ad7780 (without
powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY
at the output data rate regardless of whether the previous result was
read, so the next falling edge fires naturally.
A future registerless device that holds ~DRDY asserted until data is read
would be broken by this early return and would require either
num_resetclks set or a rdy-gpio.
The same heap corruption is reachable on any device with rdy_gpiod set
but num_resetclks = 0: if the GPIO indicates a pending event, the drain
path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers.
Add an explicit data_read_len == 0 guard after the pending event check;
the stale result is then consumed by the first ad_sd_read_reg() call in
ad_sigma_delta_single_conversion(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and
disable_one() were called from the out: block while keep_cs_asserted
was still true. This caused any SPI transfer issued by those callbacks
to carry cs_change=1, leaving CS permanently asserted after the
conversion. Fix by moving both calls into the out_unlock: block, after
keep_cs_asserted is cleared, matching the pattern already used in
ad_sd_calibrate().
In the error path of ad_sd_buffer_postenable(), if an operation fails
after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g.
spi_offload_trigger_enable()), the device is left in continuous
conversion mode with CS physically asserted. Additionally,
bus_locked remaining true after spi_bus_unlock() causes subsequent
SPI operations to call spi_sync_locked() without the bus lock actually
held, allowing concurrent SPI access.
Fix the error path by clearing keep_cs_asserted first, then calling
set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS,
then clearing bus_locked before releasing the bus.
For devices that implement neither set_mode nor disable_one (such as
MAX11205, which has no physical CS pin), no SPI transfer is issued
during cleanup and the cs_change flag has no effect on any physical
line. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: event: Fix event FIFO reset race
`iio_event_getfd()` creates the event file descriptor with
`anon_inode_getfd()`, which allocates a new fd, creates the anonymous
file and installs it in the process fd table before returning to the
caller.
The IIO code resets the event FIFO after `anon_inode_getfd()` has returned,
but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace.
But since fd tables are shared between threads, another thread can guess
the newly allocated fd number and issue a `read()` on it as soon as the fd
has been installed.
This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in
parallel with the `kfifo_reset_out()` in `iio_event_getfd()`.
The kfifo documentation says that `kfifo_reset_out()` is only safe when it
is called from the reader thread and there is only one concurrent reader.
Otherwise it is dangerous and must be handled in the same way as
`kfifo_reset()`.
If that happens, `kfifo_to_user()` can advance the FIFO `out` index based
on state from before the reset, after the reset has already moved the `out`
index to the current `in` index. That can leave the FIFO with an `out`
index past the `in` index. A later `read()` can then see an underflowed
FIFO length and copy more data than the event FIFO buffer contains. This
can result in an out-of-bounds read and leak adjacent kernel memory to
userspace.
Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is
marked busy, but the new fd has not been installed yet, so userspace cannot
access it while the FIFO is reset. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF in binder_free_transaction()
In binder_free_transaction(), the t->to_proc is read under the t->lock.
However, once the t->lock is dropped, the to_proc can die in parallel.
This leads to a use-after-free error when we attempt to acquire its
inner lock right afterwards:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0
Write of size 4 at addr ffff00001125da70 by task B/672
CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x1a0
binder_free_transaction+0x8c/0x320
binder_send_failed_reply+0x21c/0x2f8
binder_thread_release+0x488/0x7e0
binder_ioctl+0x12c0/0x29a0
[...]
Allocated by task 675:
__kmalloc_cache_noprof+0x174/0x444
binder_open+0x118/0xb70
do_dentry_open+0x374/0x1040
vfs_open+0x58/0x3bc
[...]
Freed by task 212:
__kasan_slab_free+0x58/0x80
kfree+0x1a0/0x4a4
binder_proc_dec_tmpref+0x32c/0x5e0
binder_deferred_func+0xc48/0x104c
process_one_work+0x53c/0xbc0
[...]
==================================================================
To prevent this, pin the target thread (t->to_thread) to guarantee the
target process remains alive. Undelivered transactions without a target
thread are already safe, as the target process can only be the current
context in those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restore RCU grace period in tcp_ao_destroy_sock
Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU")
removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that
"the destruction of info/keys is delayed until the socket destructor"
and therefore "no one can discover it anymore".
That argument does not hold for the call site in tcp_connect()
(net/ipv4/tcp_output.c:4327-4332). At that point the socket is in
TCP_SYN_SENT, has already been inserted into the inet ehash by
inet_hash_connect() in tcp_v4_connect(), and is therefore very much
discoverable: any softirq running tcp_v4_rcv() on another CPU can take
the socket out of the ehash, walk into tcp_inbound_hash(), and load
tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on
the destroying CPU.
The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208)
which re-loads tp->ao_info via rcu_dereference_check(); the re-load can
still observe the (about-to-be-freed) pointer because there is no
synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and
tcp_ao_info_free() in tcp_ao_destroy_sock(). The captured pointer is
then walked at line 223:
hlist_for_each_entry_rcu(key, &ao->head, node, ...)
The writer's synchronous kfree() is free to complete between the line
218 re-fetch and the line 223 hlist iteration. The slab is reused
(or simply LIST_POISON1-stamped if not yet reused) and the iteration
walks attacker-controlled or poison memory in softirq context.
Reproducer (no debug shim, stock x86_64 v7.1-rc2 SMP+KASAN, QEMU+KVM):
an unprivileged uid=1000 process inside CLONE_NEWUSER|CLONE_NEWNET
installs TCP_MD5SIG + TCP_AO_ADD_KEY on a TCP socket, sprays forged
TCP-AO segments toward its eventual 4-tuple via raw sockets, then
calls connect(). The md5-wins reconciliation in tcp_connect() fires
tcp_ao_destroy_sock(); the softirq backlog reader on the loopback
NAPI path crashes on the freed ao->head.first walk:
Oops: general protection fault, probably for non-canonical
address 0xfbd59c000000002f
KASAN: maybe wild-memory-access in range
[0xdead000000000178-0xdead00000000017f]
CPU: 0 UID: 1000 PID: 100 Comm: repro_userns
RIP: 0010:__tcp_ao_do_lookup+0x107/0x1c0
Call Trace: <IRQ>
__tcp_ao_do_lookup+0x107/0x1c0
tcp_ao_inbound_lookup.constprop.0+0x12a/0x200
tcp_inbound_ao_hash+0x5ea/0x1520
tcp_inbound_hash+0x7ce/0x1240
tcp_v4_rcv+0x1e7a/0x3e10
...
Restore the RCU grace period: re-add struct rcu_head to tcp_ao_info
and replace the synchronous tcp_ao_info_free() with a call_rcu()
callback. Readers that captured tp->ao_info before rcu_assign_pointer
NULLed it now see the object remain valid until rcu_read_unlock().
With the patch applied the reproducer runs cleanly for 2000 iterations
on the same kernel build. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: virtio: clamp device-reported used.len at copy_data()
random_recv_done() stores the device-reported used.len directly into
vi->data_avail. copy_data() then indexes vi->data[] using
vi->data_idx (advanced by previous copy_data() calls) and issues a
memcpy() without re-validating either value against the posted
buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32
or 64).
A malicious or buggy virtio-rng backend can set used.len beyond
sizeof(vi->data), steering the memcpy() past the end of the inline
array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes
those bytes into the guest RNG, and guest root can also observe
them directly via /dev/hwrng.
Concrete impact is inside the guest:
- Memory-safety / hardening: any virtio-rng backend that
over-reports used.len causes the driver to read past vi->data
into unrelated slab contents. hwrng_fillfn() is a kernel thread
that runs as soon as the device is probed; no guest userspace
interaction is required to first-trigger the OOB.
- Cross-boundary leak (confidential-compute threat model): a
malicious hypervisor cooperating with a malicious or compromised
guest root userspace can use /dev/hwrng as a leak channel for
guest-kernel heap data. The host sets a large used.len, guest
root reads /dev/hwrng, and the returned bytes contain guest
kernel slab contents that were adjacent to vi->data. In
practice, confidential-compute guests (SEV-SNP, TDX) usually
disable virtio-rng entirely, so this path is narrow, but the
fix is still worth carrying because the underlying
memory-safety bug contaminates the guest RNG on any host.
KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend
has been patched to report used.len = 0x10000:
BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0
Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52
Call Trace:
__asan_memcpy+0x23/0x60
virtio_read+0x394/0x5d0
hwrng_fillfn+0xb2/0x470
kthread+0x2cc/0x3a0
Allocated by task 1:
probe_common+0xa5/0x660
virtio_dev_probe+0x549/0xbc0
The buggy address belongs to the object at ffff88800ae0b800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes to the right of
allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20)
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened
usb9pfs_rx_complete() against unchecked device-reported length in
the USB 9p transport.
With the clamp at point of use and array_index_nospec() in place,
the same harness boots cleanly: copy_data() returns zero for the
bogus report, the device-supplied bytes after data_idx are
discarded, and the driver issues a fresh request. |
| In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix NHC entry use-after-free on error path
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix out-of-bounds read in broadcast Gap ACK blocks
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: bound slave read/write to the kern_buf size
The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy
'count' bytes into/out of the fixed-size kern_buf (size_buf ==
PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without
bounding *ppos + count against size_buf.
vme_user_write()/vme_user_read() only clamp count to the VME window size
(image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the
user-supplied slave.size -- validated against the VME address space (up
to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window
exceeds 128 KiB, a write()/read() copies past the kern_buf allocation.
Clamp count against size_buf in both helpers, with an early return when
*ppos is already at/after the buffer end. *ppos is >= 0 here (the caller
rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors
the existing clamp in the MASTER-path helpers resource_to_user() /
resource_from_user(), and matches the read()/write() convention of a
short transfer at end-of-buffer.
Found by static analysis (CodeQL taint tracking + CBMC bounded model
checking) and confirmed dynamically under KASAN with the vme_fake bridge:
BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80
Write of size 262144 at addr ffff888004100000 by task trigger/68
_copy_from_user+0x2d/0x80
vme_user_write+0x13e/0x240 [vme_user]
vfs_write+0x1b8/0x7a0
ksys_write+0xb8/0x150 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: restrict implied bcc[0] exemption to responses without data area
smb2_check_message() has a long-standing quirk that accepts a response
whose calculated length is one byte larger than the bytes actually
received ("server can return one byte more due to implied bcc[0]").
This was introduced to accommodate servers that omit the trailing bcc[0]
overlap byte when no data area is present.
However, the exemption is applied unconditionally, regardless of whether
the command actually carries a data area (has_smb2_data_area[]). When a
response with a data area is subject to the +1 exemption, the reported
data can extend one byte beyond the bytes actually received, yet
smb2_check_message() still accepts it. The subsequent decoder then reads
past the end of the receive buffer. This is reachable during NEGOTIATE
and SESSION_SETUP, before the session is established.
The resulting out-of-bounds reads are visible under KASAN when mounting
against a non-conforming server; both the SPNEGO/negTokenInit and the
NTLMSSP challenge decoders are affected:
BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00
Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81
CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
asn1_ber_decoder+0x16a7/0x1b00
decode_negTokenInit+0x19/0x30
SMB2_negotiate+0x31d9/0x4c90
cifs_negotiate_protocol+0x1f2/0x3f0
cifs_get_smb_ses+0x93f/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 85:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 0 bytes to the right of
allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0)
which belongs to the cache cifs_small_rq of size 448
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50
Read of size 329 at addr ffff88800726c678 by task mount.cifs/89
CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
print_report+0x157/0x4c9
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
__asan_memcpy+0x23/0x60
kmemdup_noprof+0x36/0x50
decode_ntlmssp_challenge+0x457/0x680
SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0
SMB2_sess_setup+0x219/0x4f0
cifs_setup_session+0x248/0xaf0
cifs_get_smb_ses+0xf79/0x17e0
cifs_mount_get_session+0x7f/0x3a0
cifs_mount+0xb4/0xcf0
cifs_smb3_do_mount+0x23a/0x1500
smb3_get_tree+0x3b0/0x630
vfs_get_tree+0x82/0x2d0
fc_mount+0x10/0x1b0
path_mount+0x50d/0x1de0
__x64_sys_mount+0x20b/0x270
do_syscall_64+0xee/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Allocated by task 93:
kmem_cache_alloc_noprof+0x106/0x380
mempool_alloc_noprof+0x116/0x1e0
cifs_small_buf_get+0x31/0x80
allocate_buffers+0x10d/0x2b0
cifs_demultiplex_thread+0x1d5/0x1d50
kthread+0x2c6/0x390
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
The buggy address is located 120 bytes inside of
allocated 448-byte region [ffff88800726c600, ffff88800726c7c0)
which belongs to the cache cifs_small_rq of size 448
Restrict the +1 exemption to responses that have no data area, so that
it still covers the bcc[0] omission it was meant for. When a data area
is present, the +1 discrepancy instead means the reported data length
overruns the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: ipu7: fix double-free and use-after-free in error paths
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths. |
