| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use-after-free in Busybox's awk applet leads to denial of service and possibly code execution when processing a crafted awk pattern in the getvar_i function |
| Use after free in libvpx in Google Chrome prior to 137.0.7151.55 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium) |
| Mbed TLS before 3.6.4 allows a use-after-free in certain situations of applications that are developed in accordance with the documentation. The function mbedtls_x509_string_to_names() takes a head argument that is documented as an output argument. The documentation does not suggest that the function will free that pointer; however, the function does call mbedtls_asn1_free_named_data_list() on that argument, which performs a deep free(). As a result, application code that uses this function (relying only on documented behavior) is likely to still hold pointers to the memory blocks that were freed, resulting in a high risk of use-after-free or double-free. In particular, the two sample programs x509/cert_write and x509/cert_req are affected (use-after-free if the san string contains more than one DN). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: at76c50x: fix use after free access in at76_disconnect
The memory pointed to by priv is freed at the end of at76_delete_device
function (using ieee80211_free_hw). But the code then accesses the udev
field of the freed object to put the USB device. This may also lead to a
memory leak of the usb device. Fix this by using udev from interface. |
| In the Linux kernel, the following vulnerability has been resolved:
md: fix mddev uaf while iterating all_mddevs list
While iterating all_mddevs list from md_notify_reboot() and md_exit(),
list_for_each_entry_safe is used, and this can race with deletint the
next mddev, causing UAF:
t1:
spin_lock
//list_for_each_entry_safe(mddev, n, ...)
mddev_get(mddev1)
// assume mddev2 is the next entry
spin_unlock
t2:
//remove mddev2
...
mddev_free
spin_lock
list_del
spin_unlock
kfree(mddev2)
mddev_put(mddev1)
spin_lock
//continue dereference mddev2->all_mddevs
The old helper for_each_mddev() actually grab the reference of mddev2
while holding the lock, to prevent from being freed. This problem can be
fixed the same way, however, the code will be complex.
Hence switch to use list_for_each_entry, in this case mddev_put() can free
the mddev1 and it's not safe as well. Refer to md_seq_show(), also factor
out a helper mddev_put_locked() to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Fix use after free and double free on init error
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free in print_graph_function_flags during tracer switching
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
[1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
This fixes the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
Read of size 8 at addr ffff888136335380 by task kworker/6:0/140241
CPU: 6 UID: 0 PID: 140241 Comm: kworker/6:0 Kdump: loaded Tainted: G E 6.14.0-rc6+ #1
Tainted: [E]=UNSIGNED_MODULE
Hardware name: LENOVO 30FNA1V7CW/1057, BIOS S0EKT54A 07/01/2024
Workqueue: events rtsx_usb_ms_poll_card [rtsx_usb_ms]
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x70
print_address_description.constprop.0+0x27/0x320
? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
print_report+0x3e/0x70
kasan_report+0xab/0xe0
? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms]
? __pfx_rtsx_usb_ms_poll_card+0x10/0x10 [rtsx_usb_ms]
? __pfx___schedule+0x10/0x10
? kick_pool+0x3b/0x270
process_one_work+0x357/0x660
worker_thread+0x390/0x4c0
? __pfx_worker_thread+0x10/0x10
kthread+0x190/0x1d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 161446:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0x7b/0x90
__kmalloc_noprof+0x1a7/0x470
memstick_alloc_host+0x1f/0xe0 [memstick]
rtsx_usb_ms_drv_probe+0x47/0x320 [rtsx_usb_ms]
platform_probe+0x60/0xe0
call_driver_probe+0x35/0x120
really_probe+0x123/0x410
__driver_probe_device+0xc7/0x1e0
driver_probe_device+0x49/0xf0
__device_attach_driver+0xc6/0x160
bus_for_each_drv+0xe4/0x160
__device_attach+0x13a/0x2b0
bus_probe_device+0xbd/0xd0
device_add+0x4a5/0x760
platform_device_add+0x189/0x370
mfd_add_device+0x587/0x5e0
mfd_add_devices+0xb1/0x130
rtsx_usb_probe+0x28e/0x2e0 [rtsx_usb]
usb_probe_interface+0x15c/0x460
call_driver_probe+0x35/0x120
really_probe+0x123/0x410
__driver_probe_device+0xc7/0x1e0
driver_probe_device+0x49/0xf0
__device_attach_driver+0xc6/0x160
bus_for_each_drv+0xe4/0x160
__device_attach+0x13a/0x2b0
rebind_marked_interfaces.isra.0+0xcc/0x110
usb_reset_device+0x352/0x410
usbdev_do_ioctl+0xe5c/0x1860
usbdev_ioctl+0xa/0x20
__x64_sys_ioctl+0xc5/0xf0
do_syscall_64+0x59/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 161506:
kasan_save_stack+0x20/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x36/0x60
__kasan_slab_free+0x34/0x50
kfree+0x1fd/0x3b0
device_release+0x56/0xf0
kobject_cleanup+0x73/0x1c0
rtsx_usb_ms_drv_remove+0x13d/0x220 [rtsx_usb_ms]
platform_remove+0x2f/0x50
device_release_driver_internal+0x24b/0x2e0
bus_remove_device+0x124/0x1d0
device_del+0x239/0x530
platform_device_del.part.0+0x19/0xe0
platform_device_unregister+0x1c/0x40
mfd_remove_devices_fn+0x167/0x170
device_for_each_child_reverse+0xc9/0x130
mfd_remove_devices+0x6e/0xa0
rtsx_usb_disconnect+0x2e/0xd0 [rtsx_usb]
usb_unbind_interface+0xf3/0x3f0
device_release_driver_internal+0x24b/0x2e0
proc_disconnect_claim+0x13d/0x220
usbdev_do_ioctl+0xb5e/0x1860
usbdev_ioctl+0xa/0x20
__x64_sys_ioctl+0xc5/0xf0
do_syscall_64+0x59/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x20/0x40
kasan_record_aux_stack+0x85/0x90
insert_work+0x29/0x100
__queue_work+0x34a/0x540
call_timer_fn+0x2a/0x160
expire_timers+0x5f/0x1f0
__run_timer_base.part.0+0x1b6/0x1e0
run_timer_softirq+0x8b/0xe0
handle_softirqs+0xf9/0x360
__irq_exit_rcu+0x114/0x130
sysvec_apic_timer_interrupt+0x72/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
Second to last potentially related work creation:
kasan_save_stack+0x20/0x40
kasan_record_aux_stack+0x85/0x90
insert_work+0x29/0x100
__queue_work+0x34a/0x540
call_timer_fn+0x2a/0x160
expire_timers+0x5f/0x1f0
__run_timer_base.part.0+0x1b6/0x1e0
run_timer_softirq+0x8b/0xe0
handle_softirqs+0xf9/0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
proc: fix UAF in proc_get_inode()
Fix race between rmmod and /proc/XXX's inode instantiation.
The bug is that pde->proc_ops don't belong to /proc, it belongs to a
module, therefore dereferencing it after /proc entry has been registered
is a bug unless use_pde/unuse_pde() pair has been used.
use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops
never changes so information necessary for inode instantiation can be
saved _before_ proc_register() in PDE itself and used later, avoiding
pde->proc_ops->... dereference.
rmmod lookup
sys_delete_module
proc_lookup_de
pde_get(de);
proc_get_inode(dir->i_sb, de);
mod->exit()
proc_remove
remove_proc_subtree
proc_entry_rundown(de);
free_module(mod);
if (S_ISREG(inode->i_mode))
if (de->proc_ops->proc_read_iter)
--> As module is already freed, will trigger UAF
BUG: unable to handle page fault for address: fffffbfff80a702b
PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:proc_get_inode+0x302/0x6e0
RSP: 0018:ffff88811c837998 EFLAGS: 00010a06
RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007
RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158
RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20
R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0
R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001
FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
proc_lookup_de+0x11f/0x2e0
__lookup_slow+0x188/0x350
walk_component+0x2ab/0x4f0
path_lookupat+0x120/0x660
filename_lookup+0x1ce/0x560
vfs_statx+0xac/0x150
__do_sys_newstat+0x96/0x110
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[adobriyan@gmail.com: don't do 2 atomic ops on the common path] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix slab-use-after-free on hdcp_work
[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.
[How]
Cancel the delayed work when destroying workqueue.
(cherry picked from commit 725a04ba5a95e89c89633d4322430cfbca7ce128) |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: fix an API misues when rio_add_net() fails
rio_add_net() calls device_register() and fails when device_register()
fails. Thus, put_device() should be used rather than kfree(). Add
"mport->net = NULL;" to avoid a use after free issue. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove()
The system can experience a random crash a few minutes after the driver is
removed. This issue occurs due to improper handling of memory freeing in
the ishtp_hid_remove() function.
The function currently frees the `driver_data` directly within the loop
that destroys the HID devices, which can lead to accessing freed memory.
Specifically, `hid_destroy_device()` uses `driver_data` when it calls
`hid_ishtp_set_feature()` to power off the sensor, so freeing
`driver_data` beforehand can result in accessing invalid memory.
This patch resolves the issue by storing the `driver_data` in a temporary
variable before calling `hid_destroy_device()`, and then freeing the
`driver_data` after the device is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: core: flush gadget workqueue after device removal
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: don't allow reconnect after disconnect
Following process can cause nbd_config UAF:
1) grab nbd_config temporarily;
2) nbd_genl_disconnect() flush all recv_work() and release the
initial reference:
nbd_genl_disconnect
nbd_disconnect_and_put
nbd_disconnect
flush_workqueue(nbd->recv_workq)
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...))
nbd_config_put
-> due to step 1), reference is still not zero
3) nbd_genl_reconfigure() queue recv_work() again;
nbd_genl_reconfigure
config = nbd_get_config_unlocked(nbd)
if (!config)
-> succeed
if (!test_bit(NBD_RT_BOUND, ...))
-> succeed
nbd_reconnect_socket
queue_work(nbd->recv_workq, &args->work)
4) step 1) release the reference;
5) Finially, recv_work() will trigger UAF:
recv_work
nbd_config_put(nbd)
-> nbd_config is freed
atomic_dec(&config->recv_threads)
-> UAF
Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so
that nbd_genl_reconfigure() will fail. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: do not force clear folio if buffer is referenced
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is. |
| In the Linux kernel, the following vulnerability has been resolved:
net: davicom: fix UAF in dm9000_drv_remove
dm is netdev private data and it cannot be
used after free_netdev() call. Using dm after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
This is similar to the issue fixed in commit
ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove").
This bug is detected by our static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Explicitly verify target vCPU is online in kvm_get_vcpu()
Explicitly verify the target vCPU is fully online _prior_ to clamping the
index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will
generate '0', i.e. KVM will return vCPU0 instead of NULL.
In practice, the bug is unlikely to cause problems, as it will only come
into play if userspace or the guest is buggy or misbehaving, e.g. KVM may
send interrupts to vCPU0 instead of dropping them on the floor.
However, returning vCPU0 when it shouldn't exist per online_vcpus is
problematic now that KVM uses an xarray for the vCPUs array, as KVM needs
to insert into the xarray before publishing the vCPU to userspace (see
commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")),
i.e. before vCPU creation is guaranteed to succeed.
As a result, incorrectly providing access to vCPU0 will trigger a
use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu()
bails out of vCPU creation due to an error and frees vCPU0. Commit
afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but
in doing so introduced an unsolvable teardown conundrum. Preventing
accesses to vCPU0 before it's fully online will allow reverting commit
afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: tegra20-emc: fix an OF node reference bug in tegra_emc_find_node_by_ram_code()
As of_find_node_by_name() release the reference of the argument device
node, tegra_emc_find_node_by_ram_code() releases some device nodes while
still in use, resulting in possible UAFs. According to the bindings and
the in-tree DTS files, the "emc-tables" node is always device's child
node with the property "nvidia,use-ram-code", and the "lpddr2" node is a
child of the "emc-tables" node. Thus utilize the
for_each_child_of_node() macro and of_get_child_by_name() instead of
of_find_node_by_name() to simplify the code.
This bug was found by an experimental verification tool that I am
developing.
[krzysztof: applied v1, adjust the commit msg to incorporate v2 parts] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync
This fixes the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543
Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961
CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543
hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 16026:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314
kmalloc_noprof include/linux/slab.h:901 [inline]
kzalloc_noprof include/linux/slab.h:1037 [inline]
mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269
mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296
remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568
hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:726
sock_write_iter+0x2d7/0x3f0 net/socket.c:1147
new_sync_write fs/read_write.c:586 [inline]
vfs_write+0xaeb/0xd30 fs/read_write.c:679
ksys_write+0x18f/0x2b0 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 16022:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2338 [inline]
slab_free mm/slub.c:4598 [inline]
kfree+0x196/0x420 mm/slub.c:4746
mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259
__mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550
hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208
hci_dev_do_close net/bluetooth/hci_core.c:483 [inline]
hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508
sock_do_ioctl+0x158/0x460 net/socket.c:1209
sock_ioctl+0x626/0x8e0 net/socket.c:1328
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
