| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/colorop: Fix blob property reference tracking in state lifecycle
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: always recover the gpu
Previously, in case there was no more work to do, recover worker
wouldn't trigger recovery and would instead rely on the gpu going to
sleep and then resuming when more work is submitted.
Recover_worker will first increment the fence of the hung ring so, if
there's only one job submitted to a ring and that causes an hang, it
will early out.
There's no guarantee that the gpu will suspend and resume before more
work is submitted and if the gpu is in a hung state it will stay in that
state and probably trigger a timeout again.
Just stop checking and always recover the gpu.
Patchwork: https://patchwork.freedesktop.org/patch/704066/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add upper bound check for num_of_nodes
drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.
(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: Prevent partial address patches
In the case that only one of lo/hi is valid, the patching could result
in a bad address written to in FW. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: zero-initialize GART table on allocation
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
(cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap()
The mmap_prepare hook functionality includes the ability to invoke
mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is
ones which are capable of calling the mmap hooks of other drivers/file
systems (e.g. overlayfs, shm).
As part of the mmap_prepare action functionality, we deal with errors by
unmapping the VMA should one arise. This works in the usual mmap_prepare
case, as we invoke this action at the last moment, when the VMA is
established in the maple tree.
However, the mmap() hook passes a not-fully-established VMA pointer to the
caller (which is the motivation behind the mmap_prepare() work), which is
detached.
So attempting to unmap a VMA in this state will be problematic, with the
most obvious symptom being a warning in vma_mark_detached(), because the
VMA is already detached.
It's also unncessary - the mmap() handler will clean up the VMA on error.
So to fix this issue, this patch propagates whether or not an mmap action
is being completed via the compatibility layer or directly.
If the former, then we do not attempt VMA cleanup, if the latter, then we
do.
This patch also updates the userland VMA tests to reflect the change. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
Kernel lacks dirty tracking support on nested domain attached to PASID,
fails the attachment early if nesting parent domain is dirty tracking
configured, otherwise dirty pages would be lost. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: bound node_desc sysfs read with %.64s
node_desc[64] in struct ib_device is not guaranteed to be NUL-
terminated. The core IB sysfs handler uses "%.64s" for exactly this
reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store()
performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL
termination:
memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX));
If exactly 64 bytes are written via the node_desc sysfs file, the array
contains no NUL byte. The ionic hca_type_show() handler uses unbounded
"%s" and will read past the end of node_desc into adjacent fields of
struct ib_device until it encounters a NUL.
ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by
userspace.
Match the core handler and bound the format specifier. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Improve validation and configuration of ACR masks
Currently there are several issues on the user space ACR mask validation
and configuration.
- The validation for user space ACR mask (attr.config2) is incomplete,
e.g., the ACR mask could include the index which belongs to another
ACR events group, but it's not validated.
- An early return on an invalid ACR mask caused all subsequent ACR groups
to be skipped.
- The stale hardware ACR mask (hw.config1) is not cleared before setting
new hardware ACR mask.
The following changes address all of the above issues.
- Figure out the event index group of an ACR group. Any bits in the
user-space mask not present in the index group are now dropped.
- Instead of an early return on invalid bits, drop only the invalid
portions and continue iterating through all ACR events to ensure full
configuration.
- Explicitly clear the stale hardware ACR mask for each event prior to
writing the new configuration.
Besides, a non-leader event member of ACR group could be disabled in
theory. This could cause bit-shifting errors in the acr_mask of remaining
group members. But since ACR sampling requires all events to be active,
this should not be a big concern in real use case. Add a "FIXME" comment
to notice this risk. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage
f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion
with the checkpoint path, which can result in an incorrect inode block
marking state. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return true
- f2fs_fsync_node_pages // inode dirtied
- f2fs_need_dentry_mark //return true
- f2fs_flush_nat_entries
- f2fs_write_checkpoint end
- __write_node_folio // inode with DENT_BIT_SHIFT set
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The state observed by f2fs_need_dentry_mark() can differ from the state
observed in __write_node_folio() after acquiring sbi->node_write. The
root cause is that the semantics of IS_CHECKPOINTED and
HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has
fully completed.
This patch moves set_dentry_mark() into __write_node_folio() and
protects it with the sbi->node_write lock. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix avdcache auditing
The per-task avdcache was incorrectly saving and reusing the
audited vector computed by avc_audit_required() rather than
recomputing based on the currently requested permissions and
distinguishing the denied versus allowed cases. As a result,
some permission checks were not being audited, e.g.
directory write checks after a previously cached directory
search check.
[PM: line wrap tweaks] |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked()
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here! |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: take vmap_purge_lock in shrinker
decay_va_pool_node() can be invoked concurrently from two paths:
__purge_vmap_area_lazy() when pools are being purged, and the shrinker via
vmap_node_shrink_scan().
However, decay_va_pool_node() is not safe to run concurrently, and the
shrinker path currently lacks serialization, leading to races and possible
leaks.
Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker
path to ensure serialization with purge users. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix race condition during PASID entry replacement
The Intel VT-d PASID table entry is 512 bits (64 bytes). When replacing
an active PASID entry (e.g., during domain replacement), the current
implementation calculates a new entry on the stack and copies it to the
table using a single structure assignment.
struct pasid_entry *pte, new_pte;
pte = intel_pasid_get_entry(dev, pasid);
pasid_pte_config_first_level(iommu, &new_pte, ...);
*pte = new_pte;
Because the hardware may fetch the 512-bit PASID entry in multiple
128-bit chunks, updating the entire entry while it is active (Present
bit set) risks a "torn" read. In this scenario, the IOMMU hardware
could observe an inconsistent state — partially new data and partially
old data — leading to unpredictable behavior or spurious faults.
Fix this by removing the unsafe "replace" helpers and following the
"clear-then-update" flow, which ensures the Present bit is cleared and
the required invalidation handshake is completed before the new
configuration is applied. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix queue freeze vs limits lock order in sysfs store methods
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal) |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: account for fraggap on the paged allocation path
In __ip_append_data(), when the paged-allocation branch is taken,
alloclen and pagedlen are computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap, but the fraggap bytes carried over
from the previous skb are copied into the new skb's linear area at
offset transhdrlen by the subsequent skb_copy_and_csum_bits(). The
linear area is therefore undersized by fraggap bytes while pagedlen is
overstated by the same amount.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
iptfs_consume_frags() transfers paged fragments from one socket buffer
to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is
the same class of bug that was fixed in skb_try_coalesce() for
CVE-2026-46300: when fragments backed by read-only page-cache pages are
merged, the marker indicating their shared nature must be preserved so
that ESP can decide correctly whether in-place encryption is safe.
Apply the same two-line fix used in skb_try_coalesce() to
iptfs_consume_frags(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
