Export limit exceeded: 368036 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (8334 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-41156 | 1 Imaginationtech | 1 Graphics Ddk | 2026-06-24 | 7.7 High |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to cause mismanagement of resources creating a write use after free scenario. A shared resource (memory page) managed by a CPU thread of control (driver) and accessed by a GPU thread of control (Firmware) can cause a write UAF when the CPU thread frees the resource before the GPU FW has finished accessing it. | ||||
| CVE-2026-56117 | 1 Networkconfiguration | 1 Dhcpcd | 2026-06-24 | 4.7 Medium |
| dhcpcd through 10.3.2, fixed in commit 78ea09e, contains a heap use-after-free vulnerability in the control socket handling within src/control.c that allows local unprivileged attackers to trigger memory corruption when privilege separation is disabled. Attackers can connect to the control socket and send a privileged command such as -x, causing control_recvdata() to free the client object while the same READ+HANGUP event subsequently reaches control_hangup() with the stale pointer, resulting in a use-after-free condition exploitable in deployments using --disable-privsep or where privsep initialization has failed with the control socket operating in mode 0666. | ||||
| CVE-2026-56113 | 1 Networkconfiguration | 1 Dhcpcd | 2026-06-24 | 5.3 Medium |
| dhcpcd through 10.3.2, fixed in commit 5733d3c, contains a heap use-after-free vulnerability that allows unauthenticated same-link attackers to crash the daemon by sending a crafted DHCPv6 RENEW reply with RFC6603 OPTION_PD_EXCLUDE and both preferred and valid lifetimes set to zero. Attackers acting as or impersonating a DHCPv6 server can trigger dhcp6_deprecatedele() to free a delegated child address while an outer TAILQ_FOREACH_SAFE iterator in dhcp6_deprecateaddrs() still holds the freed pointer, causing a use-after-free when TAILQ_REMOVE is reached. | ||||
| CVE-2023-5574 | 2 Redhat, X.org | 2 Enterprise Linux, X Server | 2026-06-23 | 7 High |
| A use-after-free flaw was found in xorg-x11-server-Xvfb. This issue occurs in Xvfb with a very specific and legacy configuration (a multi-screen setup with multiple protocol screens, also known as Zaphod mode). If the pointer is warped from a screen 1 to a screen 0, a use-after-free issue may be triggered during shutdown or reset of the Xvfb server, allowing for possible escalation of privileges or denial of service. | ||||
| CVE-2023-5380 | 4 Debian, Fedoraproject, Redhat and 1 more | 5 Debian Linux, Fedora, Enterprise Linux and 2 more | 2026-06-23 | 4.7 Medium |
| A use-after-free flaw was found in the xorg-x11-server. An X server crash may occur in a very specific and legacy configuration (a multi-screen setup with multiple protocol screens, also known as Zaphod mode) if the pointer is warped from within a window on one screen to the root window of the other screen and if the original window is destroyed followed by another window being destroyed. | ||||
| CVE-2023-48706 | 1 Vim | 1 Vim | 2026-06-23 | 3.6 Low |
| Vim is a UNIX editor that, prior to version 9.0.2121, has a heap-use-after-free vulnerability. When executing a `:s` command for the very first time and using a sub-replace-special atom inside the substitution part, it is possible that the recursive `:s` call causes free-ing of memory which may later then be accessed by the initial `:s` command. The user must intentionally execute the payload and the whole process is a bit tricky to do since it seems to work only reliably for the very first :s command. It may also cause a crash of Vim. Version 9.0.2121 contains a fix for this issue. | ||||
| CVE-2023-48231 | 2 Fedoraproject, Vim | 2 Fedora, Vim | 2026-06-23 | 3.9 Low |
| Vim is an open source command line text editor. When closing a window, vim may try to access already freed window structure. Exploitation beyond crashing the application has not been shown to be viable. This issue has been addressed in commit `25aabc2b` which has been included in release version 9.0.2106. Users are advised to upgrade. There are no known workarounds for this vulnerability. | ||||
| CVE-2023-4750 | 3 Apple, Fedoraproject, Vim | 3 Macos, Fedora, Vim | 2026-06-23 | 7.8 High |
| Use After Free in GitHub repository vim/vim prior to 9.0.1857. | ||||
| CVE-2023-4733 | 3 Apple, Fedoraproject, Vim | 3 Macos, Fedora, Vim | 2026-06-23 | 7.8 High |
| Use After Free in GitHub repository vim/vim prior to 9.0.1840. | ||||
| CVE-2023-46246 | 1 Vim | 1 Vim | 2026-06-23 | 4 Medium |
| Vim is an improved version of the good old UNIX editor Vi. Heap-use-after-free in memory allocated in the function `ga_grow_inner` in in the file `src/alloc.c` at line 748, which is freed in the file `src/ex_docmd.c` in the function `do_cmdline` at line 1010 and then used again in `src/cmdhist.c` at line 759. When using the `:history` command, it's possible that the provided argument overflows the accepted value. Causing an Integer Overflow and potentially later an use-after-free. This vulnerability has been patched in version 9.0.2068. | ||||
| CVE-2026-56376 | 1 Imagemagick | 1 Imagemagick | 2026-06-23 | 3.7 Low |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a heap use-after-free in the meta coder: when memory allocation fails, a single byte is written to a stale pointer. Remote attackers can trigger it by processing specially crafted image files, causing a denial of service. | ||||
| CVE-2026-12706 | 2 Ffmpeg, Redhat | 4 Ffmpeg, Enterprise Linux, Enterprise Linux Ai and 1 more | 2026-06-22 | 6.5 Medium |
| A use-after-free vulnerability was found in FFmpeg's RASC video decoder. The decode_move() function initializes a read pointer into a decompressed buffer, but a subsequent reallocation of that same buffer during move-table processing leaves the pointer dangling. An attacker could exploit this by providing a specially crafted AVI file containing a malicious RASC video stream. When a user opens or plays the file, the decoder reads from freed heap memory, which could lead to a denial of service (crash). | ||||
| CVE-2026-56412 | 1 Libexpat Project | 1 Libexpat | 2026-06-22 | 4.9 Medium |
| libexpat before 2.8.2 does not consider XML_TOK_DATA_CHARS in doCdataSection and thus lacks handler call depth tracking for various calls from within handlers in cases of a policy violation. Thus, a use-after-free can occur. NOTE: this issue exists because of an incomplete fix for CVE-2026-50219. | ||||
| CVE-2026-6653 | 1 Gnome | 1 Libxml2 | 2026-06-22 | 5.9 Medium |
| Use After Free in libxml2's xmlParseInternalSubset from GNOME libxml2 version 2.9.11 to 2.11.0 allows a remote attacker to cause a denial-of-service via maliciously crafted XML input with improper entity resolution handling. | ||||
| CVE-2026-11941 | 1 Cloudflare | 1 Quiche | 2026-06-22 | 5.6 Medium |
| Cloudflare Quiche was affected by 2 use-after-free vulnerabilities in the connection ID iterator FFI functions. The “quiche_connection_id_iter_next” and “quiche_conn_retired_scid_next” functions would return a pointer to a “ConnectionId” to the applications via function arguments, but the owned “ConnectionId” would be dropped at the end of those functions' scope. Only applications using those FFI functions are affected. The FFI API is disabled by default by a build-time feature flag. Impact If unpatched, an application calling the affected FFI functions will dereference freed memory. The most likely outcome is undefined behavior leading to a process crash (denial of service). Depending on allocator state, the read may also return adjacent heap contents, resulting in limited information disclosure or incorrect connection identifier handling. Mitigation Users are requested to upgrade to quiche 0.29.2 which is the earliest version containing the fix for this issue. | ||||
| CVE-2026-56131 | 1 Libexpat Project | 1 Libexpat | 2026-06-22 | 4.9 Medium |
| libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_ResumeParser from within handlers in cases of a policy violation. Thus, a use-after-free can occur (similar to the CVE-2026-50219 situation). | ||||
| CVE-2026-12007 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-06-19 | 8.8 High |
| Use after free in Core in Google Chrome on Windows prior to 149.0.7827.115 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-46323 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: don't merge zcopy skbs skb_gro_receive() can currently copy frags between the source and GRO skb, without checking the zerocopy status, and in particular the SKBFL_MANAGED_FRAG_REFS flag. When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference on the pages in shinfo->frags. Appending those frags to another skb's frags without fixing up the page refcount can lead to UAF. When either the last skb in the GRO chain (the one we would append frags to) or the source skb is zerocopy, don't merge the skbs. | ||||
| CVE-2026-46180 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put(). | ||||
| CVE-2026-46069 | 1 Linux | 1 Linux Kernel | 2026-06-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||