| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inappropriate implementation in SiteIsolation in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpci_rt1711h: unregister TCPCI port with devres
rt1711h_probe() registers the TCPCI port before requesting the interrupt
and enabling alert interrupts. If either of those later steps fails, the
probe function returns without unregistering the TCPCI port. The explicit
unregister currently only happens from the remove callback.
Register a devres action immediately after tcpci_register_port() succeeds,
so tcpci_unregister_port() runs on later probe failures and on driver
detach. Drop the remove callback to avoid unregistering the same port
twice.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: prevent infinite loop in vfio_mig_get_next_state() on blocked arc
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire: isight: bound the sample count to the packet payload
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser
snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input
stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every
iteration it advances buf and subtracts the block size while looping on
"while (len)".
len is urb->actual_length. That value is supplied by the device and is
not guaranteed to be a multiple of 16. When a final short block leaves
len between 1 and 15, the loop runs once more, reads up to buf[15], and
then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows
to a huge value. The loop then keeps iterating and walking buf far past
the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus
block id happens to be hit.
Iterate only while a full message block is available. This stops the
unsigned underflow and silently drops any trailing partial block, which
carries no complete control value anyway.
The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1
and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor
urb->actual_length before dispatching. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aoa: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails. In
layout.c, the function does not check the return value before
dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can
lead to a NULL pointer dereference.
Add NULL checks after snd_ctl_new1() calls and return early if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| XMLRPC-C Library versions 1.07 through 1.67.01 are vulnerable to a reflected cross-site scripting (XSS) vulnerability in the error page component. |
| Heap-based Buffer Overflow vulnerability in Apache Thrift C++ bindings.
This issue affects Apache Thrift: before 0.24.0.
Users are recommended to upgrade to version 0.24.0, which fixes the issue. |
| An authorization bypass was found in the OpenStack Neutron subnetpool onboarding API endpoint (PUT /v2.0/subnetpools/{id}/onboard_network_subnets). When a caller supplies a network_id, the API only verifies that the network is visible to the caller but does not verify that the caller owns the subnets on that network. When a network is RBAC-shared or globally shared, any project member with network visibility can invoke the API to onboard another project's subnets into the caller's own subnetpool, mutating the victim's subnet records (setting subnetpool_id to the attacker-controlled pool). If the attacker's subnetpool is associated with an address scope, Neutron syncs the victim's router interfaces with the attacker-controlled address scope, silently altering L3 routing, NAT, and address-scope behavior. The upstream fix adds an ownership check ensuring the caller has admin-or-owner authority over each subnet being onboarded, not merely visibility of the parent network. |
| Relative Path Traversal vulnerability in Erlang OTP (stdlib zip module) allows writing files outside the intended extraction directory via a crafted zip archive.
zip:unzip/1,2 and zip:extract/1,2 validate entry paths using zip:check_dir_level/2, which tracks directory depth as a running integer counter: .. decrements it, normal path components increment it. The caller rejects only paths where the final counter value is less than zero. A path such as ../x/y causes the counter to go negative mid-traversal then recover to zero, passing validation while resolving to a location outside the extraction directory when joined with the current working directory via add_cwd.
This vulnerability is associated with program file lib/stdlib/src/zip.erl.
This issue affects OTP from OTP 27.1 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to stdlib from 6.1 before 8.0.3, 7.3.0.1 and 6.2.2.4. |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| A denial of service issue was addressed by removing the vulnerable code. This issue is fixed in macOS Tahoe 26.6. A local attacker may be able to cause a denial of service. |
| The issue was addressed with improved checks. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, visionOS 26.6, watchOS 26.6. Processing a maliciously crafted contact may leak sensitive data. |
| An authorization issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, watchOS 26.6. An app may be able to access sensitive user data. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Processing a maliciously crafted image may lead to arbitrary code execution. |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to intercept network connections intended for another process. |
| This issue was addressed with improved checks. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to access sensitive user data. |
| An out-of-bounds write issue was addressed with improved input validation. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6. A remote attacker may be able to cause unexpected application termination or heap corruption. |
