| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an incorrect authorization vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to unauthorized command execution. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper link resolution before file access ('Link following') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to information exposure. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an insertion of sensitive information into log file vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to information exposure. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an use of less trusted source vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to information tampering. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an use of externally-controlled format string vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure and denial of service. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an integer overflow or wraparound vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper neutralization of special elements used in an OS command ('OS command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to command execution. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper neutralization of special Elements used in an OS command ('OS command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to execution of arbitrary OS commands. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper neutralization of special elements used in an OS command ('OS command Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary command execution. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Validate framework notification message layout
Framework notifications carry an indirect message in the shared RX
buffer. Validate the reported offset and size before using them, reject
zero-length payloads, and ensure that any non-header payload starts at
the UUID field rather than in the middle of the message header.
Use the validated offset and size values for both kmemdup() and the UUID
parsing path so malformed firmware data cannot drive an out-of-bounds
read or an oversized allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
A malicious connected siw peer can send an iWARP FPDU whose MPA length
field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller
than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP
parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode]
.hdr_len, but never compares mpa_len against that header length.
siw_tcp_rx_data() then derives
srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd
+ MPA_HDR_SIZE;
where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this
point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest
on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below
hdr_len - MPA_HDR_SIZE underflows to a negative int.
The signed value then flows into siw_proc_write()/siw_proc_rresp() as
bytes = min(srx->fpdu_part_rem, srx->skb_new);
is handed to siw_check_mem() as an int len (whose interval check
addr + len > mem->va + mem->len is satisfied for a valid base when
len is negative), and reaches siw_rx_data() -> siw_rx_kva() /
siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header
copy branch in skb_copy_bits() promotes that to size_t, producing a
multi-gigabyte read.
KASAN under a KUnit harness that drives the real kernel TCP receive
path -- a loopback AF_INET socketpair, the malformed FPDU written via
kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock
dispatching to siw_tcp_rx_data -- reports:
BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480
Read of size 4294967295 at addr ffff888...
Call Trace:
skb_copy_bits
siw_rx_kva
siw_rx_data
siw_check_mem
siw_proc_write
siw_tcp_rx_data
__tcp_read_sock
siw_qp_llp_data_ready
tcp_data_ready
tcp_data_queue
Add the missing invariant at the earliest point where the peer header
is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly
the value the siw transmitter uses as the minimum mpa_len for each
opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the
protocol contract. Out-of-range FPDUs terminate the connection with
TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which
is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields
do not agree on the start of an FPDU"), the correct framing-error
class for this inconsistency. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone |
| The Joomla extension ChronoForms is vulnerable to an unauthenticated stored XSS vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: eb_tables: close module init race
sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables. |
| A flaw was found in libssh. During SFTP server directory listing, the longname field is constructed with unsafe concatenation into a fixed-size stack buffer. When a client causes the server to list attacker-controlled filenames, sufficiently long names can overflow that stack buffer and may lead to crashes or possible code execution on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: set tx buffer type for SMD frames
Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp
Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup/rstat: validate cpu before css_rstat_cpu() access
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/snapshot: fix dumping of the unaligned regions
The snapshotting code internally aligns data segment to 16 bytes. This
works fine for DPU code (where most of the regions are aligned), but
fails for snapshotting of the DSI data (because DSI data region is
shifted by 4 bytes). Fix the code by removing length alignment and by
accurately printing last registers in the region. While reworking the
code also fix the 16x memory overallocation in
msm_disp_state_dump_regs().
Patchwork: https://patchwork.freedesktop.org/patch/725449/ |
| The MapSVG plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the SVGFile constructor in all versions up to, and including, 8.14.0 This is due to an incorrect conditional check that prevents file validation from taking place. This makes it possible for authenticated attackers, with Administrator-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
