| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Catapult DCT2000 protocol dissector crash in Wireshark 4.6.0 to 4.6.6 and 4.4.0 to 4.4.16 allows denial of service |
| IEEE 802.11 protocol dissector crash in Wireshark 4.6.0 to 4.6.6 and 4.4.0 to 4.4.16 allows denial of service |
| A vulnerability was found in GNU LibreDWG up to 0.13.4. The impacted element is the function dwg_next_entity of the file src/dwg.c of the component DWG File Handler. Performing a manipulation of the argument next_obj results in null pointer dereference. The attack must be initiated from a local position. The exploit has been made public and could be used. Upgrading to version 0.14 is sufficient to resolve this issue. The patch is named dde45dac3c4d902e4d8fed150a8017b9732019c9. Upgrading the affected component is recommended. Different than CVE-2026-9503. |
| GNU patch is vulnerable to a NULL pointer dereference when processing a specially crafted unified-diff patch file. Improper handling of consecutive end-of-file newline markers can corrupt internal hunk (single block of changes in diff) data structures, causing the application to pass a NULL pointer to fwrite() during patch processing.
An attacker can trigger this condition with a malicious patch file, causing the utility to crash and resulting in a denial of service.
This issue has been fixed in the commit e6d6a4e021660679d7fc9150f981d4920f722313 |
| Joda Time v2.12.5 was discovered to contain a NullPointerException via the component org.joda.time.format.PeriodFormat::wordBased(Locale). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| JGraphT Core v1.5.2 was discovered to contain a NullPointerException via the component org.jgrapht.alg.util.ToleranceDoubleComparator::compare(Double, Double). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A flaw has been found in GPAC 26.02.0. This affects the function nhmldump_send_frame of the file src/filters/write_nhml.c of the component Media File Handler. Executing a manipulation can lead to null pointer dereference. The attack requires local access. The exploit has been published and may be used. This patch is called bd1d94e70e3bef364c07c5a1d94eca5c9f56e160. A patch should be applied to remediate this issue. The project explains: "I would consider most of these more as bugs than vulns but anyway they're good to fix". |
| A null pointer dereference vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to create a denial-of-service (DoS) condition by sending specially crafted IKEv2 messages. This vulnerability affects both the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer.
This vulnerability affects Fireware OS 11.10.2 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2 |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.
One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.
[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...
Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.
This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture. |
| In the Linux kernel, the following vulnerability has been resolved:
agp/amd64: Fix broken error propagation in agp_amd64_probe()
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer dereference
PCIe errors detected by a Root Port or Downstream Port cause error
recovery services to run on all subordinate devices regardless of
administrative state.
The .error_detected() callback, bnxt_io_error_detected(), disables
and synchronizes IRQs via bnxt_disable_int_sync(), which calls
bnxt_cp_num_to_irq_num() to map completion rings to IRQs using
bp->bnapi.
Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe
error recovery on a closed NIC can dereference a NULL pointer.
Check if bp->bnapi is NULL before disabling and synchronizing IRQs. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex(). |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix NULL pointer dereference in rpmsg callback
A NULL pointer dereference was observed on Hawi at boot when the DSP
sends a glink message before fastrpc_rpmsg_probe() has completed
initialization:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
...
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
qcom_glink_native_rx+0x538/0x6a4
qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]
The faulting address 0x178 corresponds to the lock variable inside
struct fastrpc_channel_ctx, confirming that cctx is NULL when
fastrpc_rpmsg_callback() attempts to take the spinlock.
There are two issues here. First, dev_set_drvdata() is called before
spin_lock_init() and idr_init(), leaving a window where the callback
can retrieve a valid cctx pointer but operate on an uninitialized
spinlock. Second, the rpmsg channel becomes live as soon as the driver
is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata()
is called at all, resulting in dev_get_drvdata() returning NULL.
Fix both issues by moving all cctx initialization ahead of
dev_set_drvdata() so the structure is fully initialized before it
becomes visible to the callback, and add a NULL check in
fastrpc_rpmsg_callback() as a guard against any remaining window. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
When the gadget endpoint is disabled or not yet configured, the ep->desc
pointer can be NULL. This leads to a NULL pointer dereference when
__cdns3_gadget_ep_queue() is called, causing a kernel crash.
Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the
standard return code for unconfigured endpoints.
This prevents potential crashes when ep_queue is called on endpoints
that are not ready. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: prevent NPD when writing a positive value to event_done
do_uevent returns the value written to event_done. In case it is a
positive value, new_lockspace would undo all the work, and lockspace
would not be set. __dlm_new_lockspace, however, would treat that
positive value as a success due to commit 8511a2728ab8 ("dlm: fix use
count with multiple joins").
Down the line, device_create_lockspace would pass that NULL lockspace to
dlm_find_lockspace_local, leading to a NULL pointer dereference.
Treating such positive values as successes prevents the problem. Given
this has been broken for so long, this is unlikely to break userspace
expectations. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
A WARN fires when systemd's user manager writes "+cpu +memory +pids" to
its own subtree_control while a sched_ext scheduler is loaded:
WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0
scx_cgroup_move_task+0xa8/0xb0
sched_move_task+0x134/0x290
cpu_cgroup_attach+0x39/0x70
cgroup_migrate_execute+0x37d/0x450
cgroup_update_dfl_csses+0x1e3/0x270
cgroup_subtree_control_write+0x3e7/0x440
scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu
cgroup changes. It can still be NULL when scx_cgroup_move_task() runs,
through this sequence:
Step Result
--------------------------------- ----------------------------------
1. cpu enabled on cgroup G cpu css = A
2. cpu toggled off then on for G A killed, B created (same cgroup)
3. an exiting task keeps A alive migration skips it, A now stale
4. +memory migrates G stale A vs current B pulls cpu in
5. cpu attach runs for all tasks hits a live, cpu-unchanged task
6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN
The mismatch is that scx_cgroup_can_attach() keys on cgroup identity
while migration drives the move on css identity, so a NULL cgrp_moving_from
here is a legitimate css-only migration, not a missing prep.
The call is already gated on cgrp_moving_from, so just drop the warning.
ops.cgroup_prep_move() and ops.cgroup_move() stay paired. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: qcom-cci: Fix NULL pointer dereference in cci_remove()
On all modern platforms Qualcomm CCI controller provides two I2C masters,
and on particular boards only one I2C master may be initialized, and in
such cases the device unbinding or driver removal causes a NULL pointer
dereference, because cci_halt() is called for all two I2C masters, but
a completion is initialized only for the single enabled master:
% rmmod i2c-qcom-cci
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<snip>
Call trace:
__wait_for_common+0x194/0x1a8 (P)
wait_for_completion_timeout+0x20/0x2c
cci_remove+0xc4/0x138 [i2c_qcom_cci]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
device_release_driver_internal+0x1c8/0x224
driver_detach+0x50/0x98
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci]
.... |
