| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert
wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo
doesn't have enough space for the incoming report. If the kfifo is
empty, kfifo_skip() reads stale data left in the kmalloc'd buffer
via __kfifo_peek_n() and interprets it as a record length, advancing
fifo->out by that garbage value. This corrupts the internal kfifo
state, causing kfifo_unused() to return a value much larger than the
actual buffer size, which bypasses __kfifo_in_r()'s guard:
if (len + recsize > kfifo_unused(fifo))
return 0;
kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to
3842 bytes past the 256-byte buffer.
Add a !kfifo_is_empty() condition to the while loop so kfifo_skip()
is never called on an empty fifo, and check the return value of
kfifo_in() to reject reports that are too large for the fifo. |
| In the Linux kernel, the following vulnerability has been resolved:
s390: Revert support for DCACHE_WORD_ACCESS
load_unaligned_zeropad() reads eight bytes from unaligned addresses and may
cross page boundaries. It handles exceptions which may happen if reading
from the second page results in an exception.
For pages which are donated to the Ultravisor for secure execution purposes
the do_secure_storage_access() exception handler however does not handle
such exceptions correctly. Such an exception may result in an endless
exception loop which will never be resolved.
An attempt to fix this [1] turned out to be not sufficient. For now revert
load_unaligned_zeropad() until this problem has been resolved in a proper
way.
Note that the implementation of load_unaligned_zeropad() itself is
correct. The revert is just a temporary workaround until there is complete
fix for secure storage access exceptions.
[1] commit b00be77302d7 ("s390/mm: Add missing secure storage access fixups for donated memory") |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: fix device reference leak in firmware_upload_register()
firmware_upload_register()
-> fw_create_instance()
-> device_initialize()
After fw_create_instance() succeeds, the lifetime of the embedded struct
device is expected to be managed through the device core reference
counting, since fw_create_instance() has already called
device_initialize().
In firmware_upload_register(), if alloc_lookup_fw_priv() fails after
fw_create_instance() succeeds, the code reaches free_fw_sysfs and frees
fw_sysfs directly instead of releasing the device reference with
put_device(). This may leave the reference count of the embedded struct
device unbalanced, resulting in a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix this by using put_device(fw_dev) in the
failure path and letting fw_dev_release() handle the final cleanup,
instead of freeing the instance directly from the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_flush() replay
SMB2_flush() keeps its response buffer bookkeeping across replay
attempts. If a replayable flush response is received and the retry then
fails before cifs_send_recv() stores a replacement response, flush_exit
will free the stale response pointer a second time.
Reinitialize resp_buftype and rsp_iov at the top of the replay loop so
cleanup only acts on response state produced by the current attempt.
This fixes a double-free without changing replay handling for successful
requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix query_info() replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_info_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate NTLMv2 response before updating session key
ksmbd_auth_ntlmv2() derives the NTLMv2 session key into
sess->sess_key before it verifies the NTLMv2 response.
ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even
when ksmbd_auth_ntlmv2() failed.
With SMB3 multichannel binding, the failed authentication operates on
an existing session and the session setup error path does not expire
binding sessions. A client can send a binding session setup with a
bad NT proof and KEY_XCH and still modify sess->sess_key before
STATUS_LOGON_FAILURE is returned.
Relevant path:
smb2_sess_setup()
-> conn->binding = true
-> ntlm_authenticate()
-> session_user()
-> ksmbd_decode_ntlmssp_auth_blob()
-> ksmbd_auth_ntlmv2()
-> calc_ntlmv2_hash()
-> hmac_md5_usingrawkey(..., sess->sess_key)
-> crypto_memneq() returns mismatch
-> KEY_XCH arc4_crypt(..., sess->sess_key, ...)
-> out_err without expiring the binding session
Derive the base session key into a local buffer and copy it to
sess->sess_key only after the proof matches. Return immediately on
authentication failure so KEY_XCH is only processed after successful
authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for ADS I/O
Alternate data streams are stored as xattrs. Unlike regular file I/O,
their read and write paths therefore call VFS xattr helpers which recheck
inode permissions and LSM policy using the current task credentials.
Run ADS I/O with the credentials captured when the SMB handle was opened. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for delete-on-close
Delete-on-close can be completed by deferred or durable handle teardown,
where no request work is available. Both the base-file unlink and the ADS
xattr removal consequently run with the ksmbd worker credentials and can
bypass filesystem permission checks.
Run both operations with the credentials captured in struct file when the
handle was opened. This preserves the authenticated user's fsuid, fsgid,
supplementary groups and capability restrictions at final close. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with
KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle
zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to
(6/6; a FILE_READ_DATA-only handle was correctly denied).
This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL
permission bypass by adding a permission check for FSCTL_SET_SPARSE").
Because SET_ZERO_DATA writes data (not an attribute), require
FILE_WRITE_DATA. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: resolve SWN tcon from live registrations
cifs_swn_notify() looks up a witness registration by id under
cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's
cached tcon pointer. That pointer is not a lifetime reference, and it is
not a stable representative once cifs_get_swn_reg() lets multiple tcons
for the same net/share name share one registration id.
A same-share second mount can keep the cifs_swn_reg alive after the first
tcon unregisters and is freed. The registration then still points at the
freed first tcon, so taking tc_lock or incrementing tc_count through
swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while
holding cifs_swnreg_idr_mutex also violates the documented CIFS lock
order.
Fix this by making the registration store only the stable witness
identity: id, net name, share name, and notify flags. When a notify
arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex,
then find and pin a live witness tcon that currently matches the net/share
pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification
path uses that pinned tcon directly and drops the reference when done.
Registration and unregister messages now use the live tcon passed by the
caller instead of a cached tcon in the registration. The final unregister
send is folded into cifs_swn_unregister() while the registration is still
protected by cifs_swnreg_idr_mutex. This removes the previous
find/drop/reacquire raw-pointer window. The release path only removes the
idr entry and frees the stable identity strings.
This preserves the intended one-registration/many-tcon behavior: a
registration id represents a net/share pair, and notify handling acts on a
live representative selected at use time. It also preserves CLIENT_MOVE
ordering for the representative tcon because the old-IP unregister is sent
before cifs_swn_register() sends the new-IP register. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix NULL pointer dereference in debugfs
shrinker_debugfs_add() creates both "count" and "scan" debugfs files
unconditionally.
That assumes every shrinker implements both count_objects() and
scan_objects(), which is not guaranteed. For example, the xen-backend
shrinker sets count_objects() but leaves scan_objects() NULL, so writing
to its scan file calls through a NULL function pointer and panics the
kernel:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
Call Trace:
<TASK>
shrinker_debugfs_scan_write+0x12e/0x270
full_proxy_write+0x5f/0x90
vfs_write+0xde/0x420
? filp_flush+0x75/0x90
? filp_close+0x1d/0x30
? do_dup2+0xb8/0x120
ksys_write+0x68/0xf0
? filp_flush+0x75/0x90
do_syscall_64+0xb3/0x5b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The count path has the same issue in principle if a shrinker omits
count_objects().
To fix it, only create "count" and "scan" debugfs files when the
corresponding callbacks are present. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
Reading the debugfs "count" file of a memcg-aware shrinker can sleep
inside an RCU read-side critical section:
BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421
RCU nest depth: 1, expected: 0
css_rstat_flush
mem_cgroup_flush_stats
zswap_shrinker_count
shrinker_debugfs_count_show
shrinker_debugfs_count_show() invokes the ->count_objects() callback under
rcu_read_lock(). The zswap callback flushes memcg stats via
css_rstat_flush(), which may sleep, so it must not run under RCU.
The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally
and returns a memcg holding a css reference (dropped on the next iteration
or by mem_cgroup_iter_break()), so the memcg stays alive without it. The
shrinker is kept alive by the open debugfs file: shrinker_free() removes
the debugfs entries via debugfs_remove_recursive(), which waits for
in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb).
The sibling "scan" handler already invokes the sleeping ->scan_objects()
callback with no RCU section.
Drop the rcu_read_lock()/rcu_read_unlock(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes
Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP
socket state. The sysctl is stored as an `int` but copied into the
`u32` `tp->reordering` field for new sockets, so negative writes wrap
to large values.
With `tcp_mtu_probing=2`, the wrapped value can overflow the
`tcp_mtu_probe()` size calculation and drive the MTU probing path into
an out-of-bounds read. Route `tcp_reordering` writes through
`proc_dointvec_minmax()` and require it to be at least 1. Also require
`tcp_max_reordering` to be at least 1 so the configured maximum cannot
become negative either.
When registering the table for a non-init network namespace, relocate
`extra2` pointers that refer into `init_net.ipv4` so the
`tcp_reordering` upper bound follows that namespace's
`tcp_max_reordering`.
Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.
This keeps the send queue and window checks from being bypassed through
signed integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: eic-sprd: use raw_spinlock_t in the irq startup path
sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller
state through sprd_eic_update(), which takes sprd_eic->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and
used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv]
sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The
locked section only serializes MMIO register updates and does not contain
sleepable operations, so keeping it non-sleeping is appropriate for the
irqchip callbacks. |
