| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: avoid Non-NCQ command starvation
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix double free issue for tx spare buffer
In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure
is created for rollback. However, the tx_spare pointer in the original
ring handle is incorrectly left pointing to the old backup memory.
Later, if memory allocation fails in hns3_init_all_ring() during the setup,
the error path attempts to free all newly allocated rings. Since tx_spare
contains a stale (non-NULL) pointer from the backup, it is mistaken for
a newly allocated buffer and is erroneously freed, leading to a double-free
of the backup memory.
The root cause is that the tx_spare field was not cleared after its value
was saved in tmp_rings, leaving a dangling pointer.
Fix this by setting tx_spare to NULL in the original ring structure
when the creation of the new `tx_spare` fails. This ensures the
error cleanup path only frees genuinely newly allocated buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: Fix & Optimize table creation from possibly unaligned memory
Source blob may come from userspace and might be unaligned.
Try to optize the copying process by avoiding unaligned memory accesses.
- Added Fixes tag
- Added "Fix &" to description as this doesn't just optimize but fixes
a potential unaligned memory access
[jj: remove duplicate word "convert" in comment trigger checkpatch warning] |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when
interrupted. This needs to abort the URB and return an error. No data
has been received from the device so any reads from the transfer
buffer are invalid.
The original code tests !ret, which only catches the timeout case (0).
On signal delivery (-ERESTARTSYS), !ret is false so the function skips
usb_kill_urb() and falls through to read from the unfilled transfer
buffer.
Fix by capturing the return value into a long (matching the function
return type) and handling signal (negative) and timeout (zero) cases
with separate checks that both call usb_kill_urb() before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free in arena_vm_close on fork
arena_vm_open() only bumps vml->mmap_count but never registers the
child VMA in arena->vma_list. The vml->vma always points at the
parent VMA, so after parent munmap the pointer dangles. If the child
then calls bpf_arena_free_pages(), zap_pages() reads the stale
vml->vma triggering use-after-free.
Fix this by preventing the arena VMA from being inherited across
fork with VM_DONTCOPY, and preventing VMA splits via the may_split
callback.
Also reject mremap with a .mremap callback returning -EINVAL. A
same-size mremap(MREMAP_FIXED) on the full arena VMA reaches
copy_vma() through the following path:
check_prep_vma() - returns 0 early: new_len == old_len
skips VM_DONTEXPAND check
prep_move_vma() - vm_start == old_addr and
vm_end == old_addr + old_len
so may_split is never called
move_vma()
copy_vma_and_data()
copy_vma()
vm_area_dup() - copies vm_private_data (vml pointer)
vm_ops->open() - bumps vml->mmap_count
vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA
The refcount ensures the rollback's arena_vm_close does not free
the vml shared with the original VMA. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: raise barrier before state machine transition
Move the barrier raise operation before calling llbitmap_state_machine()
in both llbitmap_start_write() and llbitmap_start_discard(). This
ensures the barrier is in place before any state transitions occur,
preventing potential race conditions where the state machine could
complete before the barrier is properly raised. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free. |
| Invalid pointer in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150 and Thunderbird 150. |
| Acrobat Reader DC versions 22.001.20085 (and earlier), 20.005.3031x (and earlier) and 17.012.30205 (and earlier) is affected by the use of a variable that has not been initialized when processing of embedded fonts, potentially resulting in arbitrary code execution in the context of the current user. Exploitation requires user interaction in that a victim must open a crafted .pdf file |
| IBM HTTP Server 8.5, and 9.0 is vulnerable to invalid pointer dereference. A privileged user, authenticated to the Administration Server, could exploit this vulnerability to expose sensitive information or cause a denial of service. |
| IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_mem_cache. |
| Use after free in Codecs in Google Chrome prior to 147.0.7727.101 allowed a remote attacker to potentially perform out of bounds memory access via a crafted video file. (Chromium security severity: High) |
| Untrusted pointer dereference in Windows Universal Plug and Play (UPnP) Device Host allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix rcu_tasks stall in threaded busypoll
I was debugging a NIC driver when I noticed that when I enable
threaded busypoll, bpftrace hangs when starting up. dmesg showed:
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old.
rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old.
INFO: rcu_tasks detected stalls on tasks:
00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64
task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000
Call Trace:
<TASK>
? napi_threaded_poll_loop+0x27c/0x2c0
? __pfx_napi_threaded_poll+0x10/0x10
? napi_threaded_poll+0x26/0x80
? kthread+0xfa/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
The cause is that in threaded busypoll, the main loop is in
napi_threaded_poll rather than napi_threaded_poll_loop, where the
latter rarely iterates more than once within its loop. For
rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its
qs state, the last_qs must be 100ms behind, and this can't happen
because napi_threaded_poll_loop rarely iterates in threaded busypoll,
and each time napi_threaded_poll_loop is called last_qs is reset to
latest jiffies.
This patch changes so that in threaded busypoll, last_qs is saved
in the outer napi_threaded_poll, and whether busy_poll_last_qs
is NULL indicates whether napi_threaded_poll_loop is called for
busypoll. This way last_qs would not reset to latest jiffies on
each invocation of napi_threaded_poll_loop. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: clear walk_control on inactive context in damos_walk()
damos_walk() sets ctx->walk_control to the caller-provided control
structure before checking whether the context is running. If the context
is inactive (damon_is_running() returns false), the function returns
-EINVAL without clearing ctx->walk_control. This leaves a dangling
pointer to a stack-allocated structure that will be freed when the caller
returns.
This is structurally identical to the bug fixed in commit f9132fbc2e83
("mm/damon/core: remove call_control in inactive contexts") for
damon_call(), which had the same pattern of linking a control object and
returning an error without unlinking it.
The dangling walk_control pointer can cause:
1. Use-after-free if the context is later started and kdamond
dereferences ctx->walk_control (e.g., in damos_walk_cancel()
which writes to control->canceled and calls complete())
2. Permanent -EBUSY from subsequent damos_walk() calls, since the
stale pointer is non-NULL
Nonetheless, the real user impact is quite restrictive. The
use-after-free is impossible because there is no damos_walk() callers who
starts the context later. The permanent -EBUSY can actually confuse
users, as DAMON is not running. But the symptom is kept only while the
context is turned off. Turning it on again will make DAMON internally
uses a newly generated damon_ctx object that doesn't have the invalid
damos_walk_control pointer, so everything will work fine again.
Fix this by clearing ctx->walk_control under walk_control_lock before
returning -EINVAL, mirroring the fix pattern from f9132fbc2e83. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memfd_luo: always dirty all folios
A dirty folio is one which has been written to. A clean folio is its
opposite. Since a clean folio has no user data, it can be freed under
memory pressure.
memfd preservation with LUO saves the flag at preserve(). This is
problematic. The folio might get dirtied later. Saving it at freeze()
also doesn't work, since the dirty bit from PTE is normally synced at
unmap and there might still be mappings of the file at freeze().
To see why this is a problem, say a folio is clean at preserve, but gets
dirtied later. The serialized state of the folio will mark it as clean.
After retrieve, the next kernel will see the folio as clean and might try
to reclaim it under memory pressure. This will result in losing user
data.
Mark all folios of the file as dirty, and always set the
MEMFD_LUO_FOLIO_DIRTY flag. This comes with the side effect of making all
clean folios un-reclaimable. This is a cost that has to be paid for
participants of live update. It is not expected to be a common use case
to preserve a lot of clean folios anyway.
Since the value of pfolio->flags is a constant now, drop the flags
variable and set it directly. |
| Concrete CMS 9.5.0 and below does not validate a CSRF token before processing requests to /dashboard/extend/update/prepare_remote_upgrade/<remoteMPID>. An attacker who controls the remote package returned for a known marketplace item ID can overwrite the package PHP on disk and force its upgrade() method to execute in a single browser navigation. This results in remote code execution as the web server user. In order to be vulnerable, the victim must be passing canInstallPackages, victim site must be connected to the Concrete marketplace; and the attacker controls the package returned for a marketplace item ID already installed on the victim site. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 7.5 with vector CVSS:4.0/AV:N/AC:H/AT:P/PR:N/UI:A/VC:H/VI:H/VA:H/SC:N/SI:N/SA:N. Thanks https://github.com/maru1009 for reporting. |
