| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf
iscsi_encode_text_output() concatenates "key=value\0" records into
login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer
allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call
sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check
the remaining buffer capacity:
*length += sprintf(output_buf, "%s=%s", er->key, er->value);
*length += 1;
output_buf = textbuf + *length;
The 8192-byte ceiling at iscsi_target_check_login_request() bounds the
*input* Login PDU payload, but a single PDU can carry up to 2048 minimal
four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte
"a=NotUnderstood\0" output record via iscsi_add_notunderstood_response().
2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB
heap overrun in the kmalloc-8k slab.
The fix introduces a static iscsi_encode_text_record() helper that uses
snprintf() with a per-call bounds check against the remaining buffer,
and threads a u32 textbuf_size parameter through
iscsi_encode_text_output(). Both call sites in
iscsi_target_handle_csg_zero() (PHASE_SECURITY) and
iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass
MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls
iscsi_release_extra_responses() to drop queued records, and returns -1;
both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR /
ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning,
so the initiator sees an explicit failed-login response rather than a
silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL
caller did that; the PHASE_SECURITY caller is converted to the same
shape.) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Cap recursion depth in __tb_property_parse_dir()
A DIRECTORY entry's value field is used as the dir_offset for a
recursive call into __tb_property_parse_dir() with no depth counter.
A crafted peer that chains DIRECTORY entries into a back-reference
loop drives the parser until the kernel stack is exhausted and the
guard page fires. Any untrusted XDomain peer (cable, dock, in-line
inspector, adjacent host) that reaches the PROPERTIES_REQUEST
control-plane exchange can trigger this without authentication.
Thread a depth counter through tb_property_parse() and
__tb_property_parse_dir(), and reject blocks that exceed
TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any
observed legitimate XDomain layout.
Operators who do not need XDomain host-to-host discovery can disable
the path entirely with thunderbolt.xdomain=0 on the kernel command
line. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject u32 wrap in tb_property_entry_valid()
entry->value is u32 and entry->length is u16; the sum is performed in
u32 and wraps. A malicious XDomain peer can pick
value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0
and passes the > block_len check. tb_property_parse() then passes
entry->value to parse_dwdata() as a dword offset into the property
block, reading attacker-directed memory far past the allocation.
For TEXT-typed entries with the "deviceid" or "vendorid" keys this
lands in xd->device_name / xd->vendor_name and is readable back via
the per-XDomain device_name / vendor_name sysfs attributes; the leak
is NUL-bounded (kstrdup() stops at the first zero byte) and
untargeted (the attacker picks a delta, not an absolute address).
DATA-typed entries are parsed into property->value.data but not
generically surfaced to userspace.
Use check_add_overflow() so a wrapped sum is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix missing interrupt-in transfer sanity check
Add the missing sanity check on the size of interrupt-in transfers to
avoid parsing stale or uninitialised slab data (and leaking it to user
space). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: validate interrupt packet headers
cypress_read_int_callback() parses the interrupt-in buffer according to
the selected Cypress packet format. Format 1 has a two-byte status/count
header and format 2 has a one-byte combined status/count header. The
usb-serial core sizes the interrupt-in buffer from the endpoint
descriptor's wMaxPacketSize, and successful interrupt transfers can
complete short when URB_SHORT_NOT_OK is not set.
Check that the completed packet contains the selected header before
reading it. Malformed short reports are ignored and the interrupt URB is
resubmitted through the existing retry path, preventing out-of-bounds
header-byte reads.
KASAN report as below:
KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0
Read of size 1
Call trace:
cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009)
__usb_hcd_giveback_urb()
dummy_timer()
[ johan: use constants in header length sanity checks ] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: check URB actual_length for interrupt-IN notifications
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.
Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint. |
| ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. Prior to version 5.0.10, each table in the on-disk SQLite policy store (`/Library/Application Support/clearancekit/store.db`) is verified using an ECDSA signature stored in the `data_signatures` table. The signed payload contains only the canonical row content, with no version counter or freshness binding. An attacker who can write `store.db` and the matching `data_signatures` row — feasible during the opfilter-update window when the Endpoint Security filter is offline, or via offline-boot / decrypted-backup scenarios — can substitute a previously-captured legitimately-signed snapshot. opfilter accepts the older snapshot as fully valid on next boot because the existing signatures still verify. Version 5.0.10 patches the issue. |
| ClearanceKit intercepts file-system access events on macOS and enforces per-process access policies. The ECDSA private key used to sign the on-disk policy database (`/Library/Application Support/clearancekit/store.db`) is stored in the macOS System Keychain. The key was created via the two-step pattern `SecKeyCreateRandomKey` (in-memory) followed by `SecItemAdd(kSecValueRef:, kSecAttrAccess:)` (persist). Prior to version 5.0.10, for `kSecClassKey` items in the legacy System Keychain, `kSecAttrAccess` passed to `SecItemAdd` is silently ignored — the persisted key inherits no ACL restriction. The same access builder applied to `kSecClassGenericPassword` items correctly binds the ACL, making this bug specific to the EC key. The result is that any process running as root can use the key to produce valid signatures over arbitrary policy content. Version 5.0.10 fixes the issue. No known workarounds are available. Disabling the system extension and manually removing the System Keychain item labelled `clearancekit policy signing key` would prevent the forged-signature path but also disables policy enforcement. |
| A vulnerability was identified in jsforce up to 3.10.16. This issue affects the function _execCommand in the library lib/registry/sfdx.js of the component SFDX Connection Registry. The manipulation leads to os command injection. The attack can only be performed from a local environment. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Commit d07b26f39246 ("ksmbd: require minimum ACE size in
smb_check_perm_dacl()") introduced a transposed bounds check:
if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE)
Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates
to `aces_size < 0`. Because `aces_size` is always non-negative, this
check becomes dead code and never breaks the loop.
Worse, that commit removed the old 4-byte guard, meaning the loop now
reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This
re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation
during subsequent SMB2_CREATE operations.
Fix this by properly transposing the comparison to require at least
16 bytes (8-byte offset + 8-byte SID base), matching the correct form
used in smb_inherit_dacl(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: reset runtime state when cloning SAs
iptfs_clone_state() clones the IPTFS mode data with kmemdup(). This
copies runtime objects which must not be shared with the original SA,
including the embedded sk_buff_head, hrtimers, spinlock, and in-flight
reassembly/reorder state.
If xfrm_state_migrate() fails after clone_state() but before the later
init_state() call has reinitialized those fields, the cloned state can be
destroyed by xfrm_state_gc_task() with list and timer state copied from the
original SA. With queued packets this lets the clone splice and free skbs
owned by the original IPTFS queue, leading to use-after-free and
double-free reports in iptfs_destroy_state() and skb release paths.
Reinitialize the clone's runtime state before publishing it through
x->mode_data. Because clone_state() now publishes a destroyable mode_data
object before init_state(), take the mode callback module reference there.
Avoid taking it again from __iptfs_init_state() for the same object. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: restore combined single-frag length gate
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: fix out-of-bounds read in HCP header parsing
Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read
packet->header from skb->data at function entry without first checking
that the buffer holds at least one byte. A malicious NFC peer can send
a 0-byte HCP frame that passes through the SHDLC layer and reaches
these functions, causing an out-of-bounds heap read of packet->header.
The same 0-byte frame, if queued as a non-final fragment, also causes
the reassembly loop to underflow msg_len to UINT_MAX, triggering
skb_over_panic() when the reassembled skb is written.
Fix this by adding a pskb_may_pull() check at the entry of each
function before packet->header is first accessed. The existing
pskb_may_pull() checks before the reassembled hcp_skb is cast to
struct hcp_packet remain in place to guard the 2-byte HCP message
header. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: validate extension header length before copying to cmsg
ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR}
cmsgs (and their IPV6_2292* legacy counterparts) by trusting the
on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length.
The length was validated only at parse time (ipv6_parse_hopopts(),
etc.). An nftables payload-write expression can rewrite hdrlen after
parsing and before the skb reaches recvmsg; the write itself is
in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040
bytes from an 8-byte header. nftables is reachable from an
unprivileged user namespace, so this is an unprivileged
slab-out-of-bounds read:
BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540
put_cmsg+0x3ac/0x540
udpv6_recvmsg+0xca0/0x1250
sock_recvmsg+0xdf/0x190
____sys_recvmsg+0x1b1/0x620
Add ipv6_get_exthdr_len() which validates that at least two bytes
are accessible before reading the hdrlen field, then checks the
computed length against skb_tail_pointer(skb), returning 0 on
failure. Extension headers are kept in the linear skb area by
pskb_may_pull() during input, so skb_tail_pointer() is the correct
bound.
Use ipv6_get_exthdr_len() at all non-AH call sites: the five
standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR)
and the three standard cases in the extension-header walk loop
(DSTOPTS, ROUTING, default). AH retains an inline bounds check
because its length formula differs ((ptr[1]+2)<<2).
The walk loop also gets a pre-read bounds check at the top to
validate ptr before any case accesses ptr[0] or ptr[1].
When the walk loop detects a corrupted header, return from the
function instead of continuing to process later socket options. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: validate body pcifunc in rvu_mbox_handler_rep_event_notify
rvu_mbox_handler_rep_event_notify() in drivers/net/ethernet/marvell/
octeontx2/af/rvu_rep.c queues a sender-controlled REP_EVENT_NOTIFY
request body verbatim, and rvu_rep_up_notify() then forwards
event->pcifunc (the nested body field, distinct from the
AF-normalised header pcifunc) into rvu_get_pfvf(), rvu_get_pf() and
the AF->PF mailbox device index without any bounds check.
A VF attached to a PF that has been put into switchdev
representor mode reaches this path: the VF mailbox handler
otx2_pfvf_mbox_handler() forwards every message id including
MBOX_MSG_REP_EVENT_NOTIFY to AF without an allowlist, and the AF
dispatcher rewrites only msg->pcifunc, leaving struct
rep_event::pcifunc attacker-controlled. The sibling
rvu_mbox_handler_esw_cfg() refuses requests whose header pcifunc
is not rvu->rep_pcifunc; this handler has no equivalent gate.
An out-of-range body pcifunc selects an &rvu->pf[]/&rvu->hwvf[]
element past the allocated array and, for RVU_EVENT_MAC_ADDR_CHANGE,
turns into a six-byte attacker-chosen OOB ether_addr_copy() target
inside the queued worker; KASAN reports a slab-out-of-bounds write
in rvu_rep_wq_handler.
Reject malformed requests at the handler entry by gating on
is_pf_func_valid(), which is already the canonical PF/VF range check
in this driver; expose it via rvu.h so callers in rvu_rep.c can use
it instead of open-coding the same range arithmetic. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: Fix use after free in debug code
We're not allowed to dereference "urb" after calling
usb_hcd_giveback_urb() so save the urb->status ahead of time. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: fix use-after-free in error path
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: scd30: fix division by zero in write_raw
Add a zero check for val2 before using it as a divisor when setting the
sampling frequency. A user writing a zero fractional part to the
sampling_frequency sysfs attribute triggers a division by zero in the
kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: mhz19b: reject oversized serial replies
mhz19b_receive_buf() appends each serdev chunk into the fixed
MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without
checking that the chunk fits in the remaining space. A large callback
can therefore overflow st->buf before the command path validates the
reply.
Reset the reply state before each command and reject oversized serial
replies before copying them into the fixed buffer. When an oversized
reply is detected, wake the waiter and report -EMSGSIZE instead of
overwriting st->buf. |
