| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability, which was classified as critical, has been found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308. Affected by this issue is some unknown functionality of the component API Endpoint. The manipulation leads to missing authentication. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| PAM-PKCS#11 is a Linux-PAM login module that allows a X.509 certificate based user login. Prior to version 0.6.13, if cert_policy is set to none (the default value), then pam_pkcs11 will only check if the user is capable of logging into the token. An attacker may create a different token with the user's public data (e.g. the user's certificate) and a PIN known to the attacker. If no signature with the private key is required, then the attacker may now login as user with that created token. The default to *not* check the private key's signature has been changed with commit commi6638576892b59a99389043c90a1e7dd4d783b921, so that all versions starting with pam_pkcs11-0.6.0 should be affected. As a workaround, in `pam_pkcs11.conf`, set at least `cert_policy = signature;`. |
| CIE.AspNetCore.Authentication is an AspNetCore Remote Authenticator for CIE 3.0. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: 1. Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; 2. Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The library cie-aspnetcore refers to the second entity, the SP, and implements the validation logic of SAML assertions within SAML responses. In affected versions there is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This issue has been addressed in version 2.1.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| libsignal-service-rs is a Rust version of the libsignal-service-java library which implements the core functionality to communicate with Signal servers. Prior to commit 82d70f6720e762898f34ae76b0894b0297d9b2f8, plaintext content envelopes could be injected by a server or a malicious client, and may have been able to bypass the end-to-end encryption and authentication. The vulnerability is fixed per 82d70f6720e762898f34ae76b0894b0297d9b2f8. The `Metadata` struct contains an additional `was_encrypted` field, which breaks the API, but should be easily resolvable. No known workarounds are available. |
| Authentication vulnerability in the mobile application（tech.palm.id）may lead to the risk of information leakage. |
| A vulnerability was found in rowboatlabs rowboat up to 8096eaf63b5a0732edd8f812bee05b78e214ee97. It has been rated as critical. Affected by this issue is the function PUT of the file apps/rowboat/app/api/uploads/[fileId]/route.ts of the component Session Handler. The manipulation of the argument params leads to missing authentication. The attack may be launched remotely. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. It is expected that this issue will be fixed in the near future. |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to 7.5.2 and 8.0.2, the 3rd party authentication handling of Parse Server allows the authentication credentials of some specific authentication providers to be used across multiple Parse Server apps. For example, if a user signed up using the same authentication provider in two unrelated Parse Server apps, the credentials stored by one app can be used to authenticate the same user in the other app. Note that this only affects Parse Server apps that specifically use an affected 3rd party authentication provider for user authentication, for example by setting the Parse Server option auth to configure a Parse Server authentication adapter. The fix of this vulnerability requires to upgrade Parse Server to a version that includes the bug fix, as well as upgrade the client app to send a secure payload, which is different from the previous insecure payload. This vulnerability is fixed in 7.5.2 and 8.0.2. |
| Improper Authentication vulnerability in GE Vernova Smallworld on Windows, Linux allows Authentication Abuse.This issue affects Smallworld: 5.3.3 and prior versions for Linux, and 5.3.4. and prior versions for Windows. |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| Improper authentication handling was identified in a set of HTTP POST requests affecting the following product families:
* Digi PortServer TS - prior to and including 82000747_AA, build date 06/17/2022
* Digi One SP/Digi One SP IA/Digi One IA - prior to and including 82000774_Z, build date 10/19/2020
* Digi One IAP – prior to and including 82000770 Z, build date 10/19/2020
A specially crafted POST request to the device’s web interface may allow an unauthenticated attacker to modify configuration settings. |
| A vulnerability classified as critical has been found in Multilaser Sirius RE016 MLT1.0. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0. |
| Improper Authentication vulnerability in WF Steuerungstechnik GmbH airleader MASTER allows Authentication Bypass.This issue affects airleader MASTER: 3.00571. |
| Formbricks is an open source qualtrics alternative. Prior to version 4.0.1, Formbricks is missing JWT signature verification. This vulnerability stems from a token validation routine that only decodes JWTs (jwt.decode) without verifying their signatures. Both the email verification token login path and the password reset server action use the same validator, which does not check the token’s signature, expiration, issuer, or audience. If an attacker learns the victim’s actual user.id, they can craft an arbitrary JWT with an alg: "none" header and use it to authenticate and reset the victim’s password. This issue has been patched in version 4.0.1. |
| Salt contains an authentication protocol version downgrade weakness that can allow a malicious minion to bypass newer authentication/security features by using an older request payload format, enabling minion impersonation and circumventing protections introduced in response to prior issues. |
| pwn.college DOJO is an education platform for learning cybersecurity. Prior to commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef, the /workspace endpoint contains an improper authentication vulnerability that allows an attacker to access any active Windows VM without proper authorization. The vulnerability occurs in the view_desktop function where the user is retrieved via a URL parameter without verifying that the requester has administrative privileges. An attacker can supply any user ID and arbitrary password in the request parameters to impersonate another user. When requesting a Windows desktop service, the function does not validate the supplied password before generating access credentials, allowing the attacker to obtain an iframe source URL that grants full access to the target user's Windows VM. This impacts all users with active Windows VMs, as an attacker can access and modify data on the Windows machine and in the home directory of the associated Linux machine via the Z: drive. This issue has been patched in commit 467db0b9ea0d9a929dc89b41f6eb59f7cfc68bef. No known workarounds exist. |
| Milvus is an open-source vector database built for generative AI applications. An unauthenticated attacker can exploit a vulnerability in versions prior to 2.4.24, 2.5.21, and 2.6.5 to bypass all authentication mechanisms in the Milvus Proxy component, gaining full administrative access to the Milvus cluster. This grants the attacker the ability to read, modify, or delete data, and to perform privileged administrative operations such as database or collection management. This issue has been fixed in Milvus 2.4.24, 2.5.21, and 2.6.5. If immediate upgrade is not possible, a temporary mitigation can be applied by removing the sourceID header from all incoming requests at the gateway, API gateway, or load balancer level before they reach the Milvus Proxy. This prevents attackers from exploiting the authentication bypass behavior. |
| sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`. |
| A lack of session validation in the web API component of Shenzhen Zhibotong Electronics ZBT WE2001 23.09.27 allows remote unauthenticated attackers to access administrative information-retrieval functions intended for authenticated users. By invoking "get_*" operations, attackers can obtain device configuration data, including plaintext credentials, without authentication or an existing session. |
| A missing authentication mechanism in the web management API components of Shenzhen Zhibotong Electronics ZBT WE2001 23.09.27 allows unauthenticated attackers on the local network to modify router and network configurations. By invoking operations whose names end with "*_nocommit" and supplying the parameters expected by the invoked function, an attacker can change configuration data, including SSID, Wi-Fi credentials, and administrative passwords, without authentication or an existing session. |
