| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper control of generation of code ('Code Injection') in the schedule feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows an authenticated user with schedule creation permission to execute arbitrary PowerShell code via crafted schedule parameter names concatenated into a script invocation. |
| Improper control of generation of code ('Code Injection') in the variables feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows an authenticated user with variable write permission to execute arbitrary PowerShell code via a crafted variable value that is not properly escaped when written to the variables configuration file. |
| Cleartext storage of sensitive information in the variables feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows a local actor with file system access to read secret values via secret variables stored in cleartext on disk when no vault is selected. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config
swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but
the boundary check uses "> 4" instead of ">= 4", allowing index 4 to
cause an out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Don't queue workqueue handlers to never-online CPUs
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the
function so we have it after we freed the link.
But the link pointer can be NULL, and is not checked when the fw_id is
stored.
Fix it by simply freeing the link at the end of the function.
fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise()
A kernel panic is observed when handling machine check exceptions from
real mode.
BUG: Unable to handle kernel data access on read at 0xc00000006be21300
Oops: Kernel access of bad area, sig: 11 [#1]
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005
CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0
NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70
LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150
Call Trace:
[c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150
[c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0
The crash occurs because arch_irq_work_raise() calls preempt_disable()
from machine check exception (MCE) handlers running in real mode. In
this context, accessing the preempt_count can fault, leading to the panic.
The preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix
oops due to perf_event_do_pending call") to avoid races while raising
irq work from exception context.
Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when
queueing work on the local CPU") added preemption protection in
irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per
cpu atomics instead of regular atomics") added equivalent
protection in irq_work_queue_on() before reaching arch_irq_work_raise():
irq_work_queue() / irq_work_queue_on()
-> preempt_disable()
-> __irq_work_queue_local()
-> irq_work_raise()
-> arch_irq_work_raise()
As a result, callers other than mce_irq_work_raise() already execute
with preemption disabled, making the additional
preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
redundant.
The arch_irq_work_raise() function executes in NMI context when called
from MCE handler. Hence we will not be preempted or scheduled out since
we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove
the preempt_disable()/preempt_enable() calls from here.
Remove it to avoid accessing preempt_count from real mode context.
[Maddy: Fixed the commit title] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages()
netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it
is wanting to unlock and compares that to rreq->no_unlock_folio so that it
doesn't unlock a folio being read for netfs_perform_write() or
netfs_write_begin().
However, given that netfs_unlock_abandoned_read_pages() is called _after_
NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to
dereference is the one specified by ->no_unlock_folio as ownership
immediately reverts to the caller.
Fix this by storing the folio pointer instead and using that rather than
the index. Also fix netfs_unlock_read_folio() where the same applies. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: consume only present negotiated TTLM maps
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps65219: fix irq_data.rdev not being assigned
Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing. |
| In the Linux kernel, the following vulnerability has been resolved:
block: recompute nr_integrity_segments in blk_insert_cloned_request
blk_insert_cloned_request() already recomputes nr_phys_segments
against the bottom queue, because "the queue settings related to
segment counting may differ from the original queue." The exact same
reasoning applies to integrity segments: a stacked driver's underlying
queue can have tighter virt_boundary_mask, seg_boundary_mask, or
max_segment_size than the top queue, in which case
blk_rq_count_integrity_sg() against the bottom queue produces a
different count than the cached rq->nr_integrity_segments inherited
from the source request by blk_rq_prep_clone().
When the cached count is lower than the bottom queue's actual count,
blk_rq_map_integrity_sg() trips
BUG_ON(segments > rq->nr_integrity_segments);
on dispatch. The same families of stacked setups that motivated the
existing nr_phys_segments recompute -- dm-multipath fanning out to
nvme-rdma in particular -- can produce this.
Mirror the nr_phys_segments handling: when the request carries
integrity, recompute nr_integrity_segments against the bottom queue
and reject the request if it exceeds the bottom queue's
max_integrity_segments. blk_rq_count_integrity_sg() and
queue_max_integrity_segments() are both already available via
<linux/blk-integrity.h>, which blk-mq.c includes.
This closes a latent gap in the stacking contract and brings the
integrity-segment accounting in line with the existing
phys-segment accounting. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: pch_uart: add check for dma_alloc_coherent()
Add a check for dma_alloc_coherent() failure to prevent a potential
NULL pointer dereference in dma_handle_rx(). Properly release DMA
channels and the PCI device reference using a goto ladder if the
allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: davinci: fix division by zero on missing clock-frequency
When the 'clock-frequency' property is missing from the device tree,
the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this
macro was defined in kHz (100), whereas the device tree property is
expected in Hz.
The probe function divided the fallback value by 1000, causing
integer truncation that resulted in dev->bus_freq = 0. This triggered
a deterministic division-by-zero kernel panic when calculating clock
dividers later in the probe sequence.
Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000)
to match the expected device tree property unit, allowing the existing
division logic to work correctly for both cases. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: elan_i2c - validate firmware size before use
Ensure that the firmware file is large enough to contain the expected
number of pages and the signature (which resides at the end of the
firmware blob) before accessing them to prevent potential out-of-bounds
reads. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/base/memory: set mem->altmap after successful device registration
If __add_memory_block() fails at xa_store() (under memory pressure for
example), device_unregister() is called, which eventually triggers
memory_block_release() with mem->altmap still set, causing a
WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver.
Fix this by delaying the assignment of mem->altmap until after
__add_memory_block() has succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: hyper-v: Bound the bank index when querying sparse banks
When checking if a VP ID is included in a sparse bank set, explicitly check
that the ID can actually be contained in a sparse bank (the TLFS allows for
a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB
flush for L2, the VP ID is copied verbatim from the enlightened VMCS,
without any bounds check, i.e. isn't guaranteed to be under the limit of
4096.
Failure to check the bounds of the VP ID leads to an out-of-bounds read
when testing the sparse bank, and super strictly speaking could lead to KVM
performing an unnecessary TLB flush for an L2 vCPU.
==================================================================
BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm]
Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802
CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x60
print_report+0xcb/0x5d0
kasan_report+0xb4/0xe0
kasan_check_range+0x35/0x1b0
hv_is_vp_in_sparse_set+0x85/0x100 [kvm]
kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm]
kvm_hv_hypercall+0xe6b/0x1e60 [kvm]
vmx_handle_exit+0x485/0x1b60 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm]
kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm]
__x64_sys_ioctl+0x129/0x1a0
do_syscall_64+0xb9/0xcf0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f0e62d1a9bf
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f
flags: 0x4000000000000000(zone=1)
raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000
raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
Opportunistically add a compile time assertion to ensure the maximum number
of sparse banks exactly matches the number of possible bits in the passed
in mask.
[sean: add KASAN splat, drop comment, add assert, massage changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function
marks the CPU offline for the scheduler via set_cpu_online(false) but
never informs RCU, so RCU keeps expecting a quiescent state from CPUs
that are now spinning forever with interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. Since commit
91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
however, irq_work_sync() calls synchronize_rcu() on architectures without
an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns
false. That is the asm-generic default used by MIPS. Any irq_work_sync()
issued in the reboot/shutdown path after smp_send_stop() then blocks on
a grace period that can never complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue was noticed on several Realtek MIPS switch SoCs (MIPS
interAptiv) and came up during kernel bump downstream in OpenWrt from
6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable
branch. The patch also has been backported all the way back to 6.1.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the
generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs
and grace periods can still complete. MIPS shuts down all CPUs here
without going through the CPU-hotplug mechanism, so this report is not
otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug
offline path is not unprecedented: arm64 does the same in cpu_die_early().
There it is an exception for a CPU that was coming online and is aborting
bringup, rather than the default shutdown action as on MIPS. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/fork: clear PF_BLOCK_TS in copy_process()
PF_BLOCK_TS is only set in blk_time_get_ns() when current->plug is
non-NULL, and blk_finish_plug() clears it via __blk_flush_plug()
before NULLing the plug pointer. copy_process() breaks the
invariant by inheriting PF_BLOCK_TS from the parent while resetting
the child's plug to NULL.
Clear PF_BLOCK_TS alongside that assignment so callers can rely on
"PF_BLOCK_TS set implies current->plug != NULL" and dereference
current->plug unguarded. |
