| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dasel is a command-line tool and library for querying, modifying, and transforming data structures. From 3.0.0 until 3.10.1, the escape sequence handler in (*Tokenizer).parseCurRune in selector/lexer/tokenize.go increments past a trailing backslash in a quoted string such as "\ or '\ and then reads p.src[pos] without a bounds check, allowing attacker-controlled selector strings to trigger a Go index-out-of-range panic. This issue is fixed in version 3.10.1. |
| ncnn is a high-performance neural network inference framework optimized for the mobile platform. In commit e54f7b1f88434e1d844ea0551b880a1cfb079ce1 and earlier, ncnn allows an out-of-bounds heap write in ncnn::ParamDict::load_param() when Net::load_param() loads a malicious .param model file because the parsed parameter id is checked only against id >= NCNN_MAX_PARAM_COUNT, allowing a negative id to index before the params[NCNN_MAX_PARAM_COUNT] array. This vulnerability is fixed by commit 5a0288f255daa6c3294f77109f67718e434ec020. |
| NVIDIA TensorRT for contains a vulnerability where an attacker might cause an improper validation of array index. A successful exploit of this vulnerability might lead to code execution. |
| Ollama downloadBlob Improper Validation of Array Index Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Ollama. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the downloadBlob function. The issue results from the lack of proper validation of user-supplied data, which can result in a memory access past the end of an allocated array. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-27277. |
| The application opens a PDF, but the cloud-like appearance of the construction process lacks proper setting of an upper limit and consistency checks. Out-of-bounds access to the underlying array is exposed, ultimately leading to a crash of the application. |
| An out-of-bounds heap write exists in the RAR5 recovery-volume (.rev) parser in WinRAR and UnRAR (RecVolumes5::ReadHeader in recvol5.cpp). The RecItems vector is sized only when the first .rev file in a set is processed; subsequent .rev files supply an independent RecNum value that is validated against that file's own TotalCount field but never against the actual size of RecItems. A crafted set of two or more .rev files can therefore write an attacker-controlled 32-bit value (the header's RevCRC field) to RecItems[RecNum] at an attacker-controlled offset up to 65534 * sizeof(RecVolItem) bytes past the allocation, corrupting adjacent heap objects. Triggering requires the victim to run a recovery/test operation on an attacker-supplied .rev set (for example 'unrar t x.part1.rev', WinRAR 'Repair archive', or auto-recovery when extracting a volume set with a missing .rar part). This is the RAR5-path sibling of CVE-2023-40477 (which was fixed in the RAR3 path only in WinRAR 6.23). Fixed in WinRAR / RAR 7.23. |
| Apfloat v1.10.1 was discovered to contain an ArrayIndexOutOfBoundsException via the component org.apfloat.internal.DoubleCRTMath::add(double[], double[]). NOTE: this is disputed by multiple third parties who believe there was not reasonable evidence to determine the existence of a vulnerability. The submission may have been based on a tool that is not sufficiently robust for vulnerability identification. |
| All versions of the package audify are vulnerable to Improper Validation of Array Index when frameSize is provided to the new OpusDecoder().decode or new OpusDecoder().decodeFloat functions it is not checked for negative values. This can lead to a process crash. |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### byPass command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### 2wayAudio command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### audio command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### disconnect command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### play command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
#### pause command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
### saveVideo command index-out-of-bound
When sending the `saveVideo` command, the `index` field is extracted from the websocket message [1]. Then without checking the range of the index, it is used to trigger a CriticalSection ([2]) and releases it [3]. The release function call ([3]) is executed using a function pointer which will be read out of bounds potentially leading to code execution:
v6 = get_entry(a2, "index");
result = json_is_value_int(v6);
if ( (_BYTE)result )
{
v8 = get_entry(a2, "index");
index = json_value_to_int(&v8->value); // [1]
result = CCriticalSection::EnterCritSection(&this->crit_sections[index]); //[2]
if ( result )
{
if ( this->array_of_IPCams[index] )
{
if ( this->array_of_IPCams[index]->field_20 )
do_PostMessageA((CViewer *)this->array_of_IPCams[index], 0x111u, 0x139Fu, v11);
}
return (*(int (__thiscall **)(CCriticalSection *))(this->crit_sections[index].vtbl + 20))(&this->crit_sections[index]); //[3]
}
} |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setPIP command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### setStream command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### connectInfo command index-out-of-bound |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly.
The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound.
#### snapshot command index-out-of-bound |
| DVP80ES300T with Improper Validation of Array Index Vulnerability |
