Export limit exceeded: 370548 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370548 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370548 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64330 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes(). | ||||
| CVE-2026-64334 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver. | ||||
| CVE-2026-14203 | 2026-07-27 | N/A | ||
| The Smart Manager WordPress plugin before 8.92.0 does not properly encode a post field before rendering it into an HTML attribute in its management grid, allowing users with the Contributor role or above to inject JavaScript that executes in the browser session of an administrator who views the grid. | ||||
| CVE-2026-14190 | 2026-07-27 | N/A | ||
| The Sina Extension for Elementor WordPress plugin before 3.10.2 does not escape a value reconstructed from request input in one of its unauthenticated AJAX handlers before reflecting it into the HTML response, allowing unauthenticated attackers to execute arbitrary JavaScript in the browser of anyone who triggers a crafted request. | ||||
| CVE-2026-14189 | 2026-07-27 | N/A | ||
| The WPBot WordPress plugin before 8.5.2 does not validate administrator-configured field identifiers before using them in a SQL query, allowing users with administrator access to perform SQL injection that executes when a visitor triggers a search. | ||||
| CVE-2026-13726 | 2026-07-27 | N/A | ||
| The MPG WordPress plugin before 4.1.8 does not sanitise and escape a parameter before reflecting it back in the response, allowing unauthenticated attackers to perform Reflected Cross-Site Scripting against a victim who is induced to send a crafted request. | ||||
| CVE-2026-13714 | 2026-07-27 | N/A | ||
| The Realtyna Organic IDX plugin + WPL Real Estate WordPress plugin before 5.3.0 does not validate the type of uploaded files, and its file upload functionality is gated only by an API that is enabled by default and authenticated with hardcoded credentials shipped identically across all installations. This makes it possible for unauthenticated attackers to upload arbitrary PHP files and achieve remote code execution. | ||||
| CVE-2026-13597 | 2026-07-27 | N/A | ||
| The 微信二维码登陆 WordPress plugin through 1.3 does not properly validate WeChat webhook requests, as its signature check always passes, and it discloses the generated login code in the webhook response. This allows an unauthenticated attacker to forge a login event for any existing username, read the login code, and redeem it through an unauthenticated AJAX action to log in as that user, including an administrator, without a password. | ||||
| CVE-2026-13400 | 2026-07-27 | N/A | ||
| Simply Schedule Appointments is vulnerable to unauthenticated Stored Cross-Site Scripting in all versions up to and including 1.6.12.2. The root cause is a sanitization-ordering defect: the rendered notification content is decoded back into live HTML after it has already passed through the Simply Schedule Appointments WordPress plugin before 1.6.12.4's wp_kses_post() filter, so a double-encoded payload survives intake and is reintroduced as an executable element at render time. | ||||
| CVE-2026-13390 | 2026-07-27 | N/A | ||
| The Events Calendar WordPress plugin before 6.16.5.1 does not perform an authorization check on one of its Event Aggregator import REST API routes and skips an integrity check for a particular status value, allowing unauthenticated attackers to mark existing import records as failed and to store arbitrary content in a hidden comment record. | ||||
| CVE-2026-13332 | 2026-07-27 | N/A | ||
| The Masteriyo LMS WordPress plugin before 2.3.1 does not correctly verify authorization on an unauthenticated AJAX action used to clear user sessions, allowing unauthenticated attackers to terminate the active sessions (force-logout) of any user on the site, including administrators. | ||||
| CVE-2026-13152 | 2026-07-27 | N/A | ||
| The Custom Fields Account Registration For Woocommerce WordPress plugin before 1.4 does not prevent its custom registration fields from writing to the user capabilities meta key on sites that use a non-default database table prefix, so an unauthenticated user who registers an account can be granted the administrator role when a correspondingly named field has been configured. | ||||
| CVE-2026-12982 | 2026-07-27 | N/A | ||
| The Document Gallery WordPress plugin before 5.1.1 does not properly sanitise and escape user input before reflecting it back in the response of an unauthenticated AJAX action, leading to a Reflected Cross-Site Scripting vulnerability which can be exploited against unauthenticated users. | ||||
| CVE-2026-12493 | 2026-07-27 | N/A | ||
| The Clover Payment Gateway by Zaytech for WooCommerce WordPress plugin before 1.3.6 does not verify that an approved external payment record actually belongs to the WooCommerce order being completed, nor that the paid amount matches the order total, allowing unauthenticated users to mark arbitrary orders as paid by replaying a single genuinely-approved payment reference (for example one obtained from their own minimal purchase). | ||||
| CVE-2026-12394 | 2026-07-27 | N/A | ||
| The MemberGlut WordPress plugin before 1.1.5 does not validate the role chosen during front-end registration, allowing unauthenticated users to register an account with an arbitrary role, including administrator, leading to full site compromise. | ||||
| CVE-2026-12255 | 2026-07-27 | N/A | ||
| The MainWP Child WordPress plugin before 6.1.2 does not verify the requester's identity in its site-registration request handler when password authentication has been disabled for the targeted account, allowing an unauthenticated attacker to obtain a valid authentication session as that account, including an administrator, by naming its login in a single registration request. | ||||
| CVE-2026-10082 | 2026-07-27 | N/A | ||
| The Advanced Ads WordPress plugin before 2.0.23 does not sanitize and escape a shortcode parameter before outputting it in the page, allowing users with the Contributor role and above to inject arbitrary web scripts that execute when the affected content is viewed, including by higher-privileged users. | ||||
| CVE-2025-15662 | 2026-07-27 | N/A | ||
| The Printcart Web to Print Product Designer for WooCommerce WordPress plugin before 2.5.3 does not restrict a user-supplied URL before fetching it server-side and does not enforce a valid authorization check, allowing unauthenticated attackers to read arbitrary local files (including configuration files containing database credentials and secret keys) and to make server-side requests to internal resources. | ||||
| CVE-2026-64336 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. | ||||
| CVE-2026-64339 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing adjacent slab memory; with KASAN this is reported as a slab-out-of-bounds read. The number of bytes actually received is already known: act equals the URB actual_length and is bounded by rxbuf_len. Reject any response that claims more payload than was received, mirroring the existing "act < sizeof(*bpkt)" check just above. The control path (usbio_ctrl_msg()) is not affected: it uses a single buffer (ctrlbuf) for both directions, so its analogous copy can never leave the allocation. Found by code review. The out-of-bounds read was confirmed under AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is also available. | ||||