Export limit exceeded: 369503 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (369503 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63974 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained. | ||||
| CVE-2026-63976 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success l2cap_ecred_reconf_rsp() returns early on success without clearing chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp, l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a successful transaction to prevent the channel from matching subsequent responses with the recycled ident value. A remote attacker that completed a reconfiguration as the peer can replay a failure response with the stale ident, causing the kernel to match and destroy the already-established channel via l2cap_chan_del(chan, ECONNRESET). Clear chan->ident for all matching channels on success, and harden the failure path by using l2cap_chan_hold_unless_zero() consistent with other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). | ||||
| CVE-2026-63982 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop When mirred redirects to ingress (from either ingress or egress) the loop state from sched_mirred_dev array dev is lost because of 1) the packet deferral into the backlog and 2) the fact the sched_mirred_dev array is cleared. In such cases, if there was a loop we won't discover it. Here's a simple test to reproduce: ip a add dev port0 10.10.10.11/24 tc qdisc add dev port0 clsact tc filter add dev port0 egress protocol ip \ prio 10 matchall action mirred ingress redirect dev port1 tc qdisc add dev port1 clsact tc filter add dev port1 ingress protocol ip \ prio 10 matchall action mirred egress redirect dev port0 ping -c 1 -W0.01 10.10.10.10 | ||||
| CVE-2026-63983 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix packet loop on netem when duplicate is on When netem duplicates a packet it re-enqueues the copy at the root qdisc. If another netem sits in the tree the copy can be duplicated again, recursing until the stack or memory is exhausted. The original duplication guard temporarily zeroed q->duplicate around the re-enqueue, but that does not cover all cases because it is per-qdisc state shared across all concurrent enqueue paths and is not safe without additional locking. Use the skb tc_depth field introduced in an earlier patch: - increment it on the duplicate before re-enqueue - skip duplication for any skb whose tc_depth is already non-zero. This marks the packet itself rather than mutating qdisc state, therefore it is safe regardless of tree topology or concurrency. | ||||
| CVE-2026-63985 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. | ||||
| CVE-2026-63988 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the two STP related attributes that require it. Remove the now stale comment from br_switchdev_set_port_flag(). The SWITCHDEV_F_DEFER flag can be removed in net-next. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 5 locks held by bash/372: #0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740) #1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343) #2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344) #3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326) #4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235) brport_store (net/bridge/br_sysfs_if.c:346) kernfs_fop_write_iter (fs/kernfs/file.c:352) new_sync_write (fs/read_write.c:595) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-63989 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in netlink path Since the introduction of the netlink configuration path for bridge ports in commit 25c71c75ac87 ("bridge: bridge port parameters over netlink"), br_setport() was always called with the bridge lock held around it. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function only processed three STP related netlink attributes (cost, priority and state). Nowadays, br_setport() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port and NHID: Only require RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the three STP related attributes that require it. This is consistent with the multicast attributes where each attribute acquires the multicast lock instead of having one critical section for all relevant attributes. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 2 locks held by bridge/356: #0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002) #1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) br_setport (net/bridge/br_netlink.c:1000) br_setlink (net/bridge/br_netlink.c:1118) rtnl_bridge_setlink (net/core/rtnetlink.c:5572) rtnetlink_rcv_msg (net/core/rtnetlink.c:7005) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-63993 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. | ||||
| CVE-2024-51312 | 1 Tenda | 1 Tx9 | 2026-07-21 | 9.8 Critical |
| The Tenda TX9 V22.03.02.20 firmware has a stack overflow vulnerability in the sub_42EEE0 function of the file /goform/SetStaticRouteCfg. | ||||
| CVE-2024-51313 | 1 Tenda | 1 Tx9 | 2026-07-21 | 9.8 Critical |
| The Tenda TX9 V22.03.02.20 firmware has a stack overflow vulnerability in the sub_42EA38 function of the file /goform/SetVirtualServerCfg. | ||||
| CVE-2024-51315 | 1 Tenda | 1 Tx9 | 2026-07-21 | 9.8 Critical |
| The Tenda TX9 V22.03.02.20 firmware has a stack overflow vulnerability in the sub_425964 function of the file /goform/SetOnlineDevName | ||||
| CVE-2026-65048 | 3 Ninjaforms, Saturday Drive, Wordpress | 3 Ninja Forms, Ninja Forms, Wordpress | 2026-07-21 | 9.3 Critical |
| Ninja Forms plugin for WordPress versions 3.10.4 through 3.14.9 contains an unauthenticated stored cross-site scripting vulnerability in the Repeatable Fieldset feature where parseSubmissionIndex() accepts arbitrary strings as submission indexes without numeric validation, and admin_form_element() interpolates the index directly into HTML without escaping. An unauthenticated attacker can submit a public form with a crafted repeater child key containing malicious script payloads, which execute in an administrator's browser when viewing submissions in the WordPress admin panel, enabling session-cookie theft, creation of administrator accounts, installation of malicious plugins, and arbitrary modification of site content. | ||||
| CVE-2026-47394 | 1 Mervinpraison | 1 Praisonai | 2026-07-21 | N/A |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.40, the fix for GHSA-9mqq-jqxf-grvw / CVE-2026-44336 is incomplete. The original advisory description named four vulnerable handlers in `mcp_server/adapters/cli_tools.py`. Commit `68cc9427` ("fix(security): harden MCP rules path handling…") added a `_resolve_rule_path()` helper and applied it to `rules.create`, `rules.show`, and `rules.delete`. `workflow.show` was left unchanged. Two adjacent handlers in the same file have the same pattern, `workflow.validate` and `deploy.validate`. Neither was mentioned in the original advisory. Both remained unchanged. The original advisory also identified the dispatcher (`server.py:281-298`) as a root cause. It accepts unvalidated `**kwargs` from `params["arguments"]` with no enforcement against the tool's declared `input_schema`. That code is unchanged prior to version 4.6.40. A single unauthenticated MCP `tools/call` to `praisonai.workflow.show` returns the contents of any file the host user can read: `/etc/passwd`, `~/.ssh/id_rsa`, `~/.aws/credentials`, or any project `.env`. Version 4.6.40 contains an updated fix. | ||||
| CVE-2026-47398 | 1 Mervinpraison | 1 Praisonai | 2026-07-21 | 8.1 High |
| PraisonAI is a multi-agent teams system. The v4.6.32 chokepoint refactor (which patched CVE-2026-44334 / GHSA-xcmw-grxf-wjhj) added the PRAISONAI_ALLOW_LOCAL_TOOLS env-var gate to the tool_override.py sinks. However, two additional spec.loader.exec_module call sites in praisonai/agents_generator.py were missed and remain completely unguarded in versions prior to 4.6.40. Both functions accept a module_path parameter sourced from YAML configuration and execute it without validation, signature checking, or the env-var gate. Version 4.6.40 fixes the issue. | ||||
| CVE-2026-15793 | 1 Moby | 1 Buildkit | 2026-07-21 | N/A |
| BuildKit custom frontends or clients using the raw low-level API can set git.checkoutbundle=true when checking out Git sources. If the Git source is malicious, this could lead to a crafted command invocation on the host. | ||||
| CVE-2026-16486 | 1 Sourcecodester | 1 Class And Exam Timetabling System | 2026-07-21 | 4.3 Medium |
| A vulnerability was found in SourceCodester Class and Exam Timetabling System 1.0. This affects an unknown part of the file /BSIS.php. Performing a manipulation of the argument day results in cross site scripting. The attack may be initiated remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-63999 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation. | ||||
| CVE-2026-64003 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. | ||||
| CVE-2026-64005 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: Do not re-initialize smc hashtables INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(), proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht being reset even though hash entries already exist and are being used, possibly resulting in a corrupted list. Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in smc_init(); it is implicitly initialised to zero anyhow. Add HLIST_HEAD_INIT to the definitions for clarity. | ||||
| CVE-2026-64008 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix UAF via dangling GEM handle in create_bo rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via drm_gem_handle_create() early on, then performs several operations that can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after the handle is live, the error path calls drm_gem_shmem_object_free() which kfree's the object without removing the handle from the IDR. This leaves a dangling handle pointing to freed slab memory. Any subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls drm_gem_object_lookup() and dereferences freed memory (UAF). Fix by moving drm_gem_handle_create() to after all fallible operations succeed, matching the pattern used by panfrost, lima, and etnaviv. Also fix drm_mm_insert_node_generic() whose return value was silently overwritten by iommu_map_sgtable() on the next line. Add the missing error check. [tomeu: Move handle creation to the very end] | ||||