Export limit exceeded: 367753 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (367753 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64152 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Handle unmap error when iommu_debug is enabled Sashiko noticed a latent bug where the map error flow called iommu_unmap() which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however since this is an error path the map flow never actually established the original iommu_debug_map() it will malfunction. Lift the unmap error handling into iommu_map_nosync() and reorder it so the trace_map()/iommu_debug_map() records the partial mapping and then immediately unmaps it. This avoid creating the unbalanced tracking and provides saner tracing instead of a unmap unmatched to any map. | ||||
| CVE-2026-64151 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap Sashiko pointed out that the driver could drop PAGE_SIZE from the pgsize_bitmap. That is technically allowed but nothing does it, and such an iommu_domain would not be used with the DMA API today. Still, it is against the design and it is trivial to fix up. Lift the PT_WARN_ON to the if branch and just skip the fast path. | ||||
| CVE-2026-64150 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: release local_lock before re-enabling softirqs Quoting sashiko: In the error path, local_bh_enable() is called before local_unlock_nested_bh(). | ||||
| CVE-2026-64148 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery. | ||||
| CVE-2026-64142 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: close durable scavenger races against m_fp_list lookups ksmbd_durable_scavenger() has two related races against any walker that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode() (used by ksmbd_vfs_rename) and the share-mode checks in fs/smb/server/smb_common.c. (1) fp->node list-head reuse. Durable-preserved handles can remain linked on f_ci->m_fp_list after session teardown so share-mode checks still see them while the handle is reconnectable. The scavenger collected expired handles by adding fp->node to a local scavenger_list after removing them from the global durable idr. Because fp->node is the same list_head used by m_fp_list, list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links and corrupts both lists. CONFIG_DEBUG_LIST can report this on the share-mode walk path. (2) Refcount race against m_fp_list walkers. The scavenger qualifies an expired durable handle with atomic_read(&fp->refcount) > 1 and fp->conn under global_ft.lock, removes fp from global_ft, then drops global_ft.lock before unlinking fp from m_fp_list and freeing it. During that gap fp is still linked on m_fp_list with f_state == FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and takes a live reference; the scavenger then unlinks and frees fp while the holder owns a reference, leading to UAF on the holder's subsequent ksmbd_fd_put() and on any field reads performed by a concurrent share-mode walker that iterates m_fp_list without taking ksmbd_fp_get() (smb_check_perm_dleases-like paths). Fix both: * Stop reusing fp->node as a scavenger-private list node. Remove one expired handle from global_ft under global_ft.lock, take an explicit transient reference, drop the lock, unlink fp->node from m_fp_list under f_ci->m_lock, then drop both the durable lifetime and transient references with atomic_sub_and_test(2, &fp->refcount). If the scavenger is the last putter the close runs there; otherwise an in-flight holder that already raced through the m_fp_list lookup owns the final close via its ksmbd_fd_put() path. The one-at-a-time disposal can rescan the durable idr when multiple handles expire in the same pass, but durable scavenging is a background expiration path and the final full scan recomputes min_timeout before the next wait. * Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right after idr_remove(), so a delayed final close from a holder that snatched fp does not re-issue idr_remove() on a persistent id that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have already handed out to a brand-new durable handle. * Bypass the per-conn open_files_count decrement in __put_fd_final() when fp is detached from any session table (fp->conn cleared by session_fd_check() at durable preserve -- paired with the volatile_id clear at unpublish, so checking fp->conn alone is sufficient). The walker that owns the final close runs from an unrelated work->conn whose stats.open_files_count never tracked this durable fp; without this guard the holder would underflow that unrelated counter. The two races are folded into one patch because patch (1) alone cleans up the corrupted list but leaves a deterministic UAF window for m_fp_list walkers that the transient-reference and persistent_id discipline in (2) close; bisecting onto an intermediate state would land on a UAF that pre-patch chaos merely made less reproducible. Validation: * CONFIG_DEBUG_LIST coverage for the list_head reuse path. * KASAN-enabled direct SMB2 durable-handle coverage that exercised ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode() returns while durable handles expired under concurrent rename lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING reports. ---truncated--- | ||||
| CVE-2026-64141 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in compare_guid_key() session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result. | ||||
| CVE-2026-64140 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in proc_show_files() When a SMB2 client opens a file with a durable v2 handle and then issues SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the reconnectable file pointer but leaves the fp registered in global_ft.idr until the durable scavenger fires (up to fp->durable_timeout seconds later). During that window any read of /proc/fs/ksmbd/files (mode 0400) panics the kernel because proc_show_files() walks global_ft.idr and unconditionally dereferences fp->tcon->id with no NULL guard. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:proc_show_files+0x118/0x740 Call Trace: proc_show_files+0x118/0x740 seq_read_iter+0x4ef/0xe10 proc_reg_read_iter+0x1b7/0x280 ... Guard the dereference. A durable-disconnected fp legitimately has no tcon; report its tree id as 0 rather than oopsing. | ||||
| CVE-2026-64138 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate SID in parent security descriptor during ACL inheritance Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved from the parent directory. | ||||
| CVE-2026-64137 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: require net admin for CIFS SWN netlink CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations. | ||||
| CVE-2026-64136 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked(). | ||||
| CVE-2026-64134 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Don't setup bogus iov_iter for silencing At transition to the iov_iter for PCM data transfer, we blindly applied the iov_iter setup also for silencing (i.e. data = NULL), and it leads to a calculation of bogus iov_iter. Fortunately this didn't cause troubles on most of architectures but it goes wrong on RISC-V now, causing a NULL dereference. Handle the NULL data case to treat the silencing in interleaved_copy() for addressing the bug above. noninterleaved_copy() has already the NULL data handling, so it doesn't need changes. | ||||
| CVE-2026-64133 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access at reading cache find_control() to retrieve a cached info accesses the array with the given index blindly, which may lead to an OOB array access. Add a sanity check for avoiding it. | ||||
| CVE-2026-64132 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: refresh hdr pointer before ioam6_event() Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. | ||||
| CVE-2026-64126 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate Add Extended Advertising Data length MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command, with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy cp->data, but it never checks that those bytes are part of the mgmt command payload. A short command can therefore make add_ext_adv_data() pass an out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond the command buffer are addressable, they can also be copied into the advertising instance as scan response data, where the caller can read them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte slab-out-of-bounds read. Reject commands whose length does not match the fixed header plus both advertising data lengths before parsing cp->data. | ||||
| CVE-2026-64125 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working. | ||||
| CVE-2026-64124 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: devmem: reject dma-buf bind with non-page-aligned size or SG length net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be PAGE_SIZE multiples without checking: - tx_vec is sized dmabuf->size / PAGE_SIZE, and net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size before indexing tx_vec[virt_addr / PAGE_SIZE]. With size = N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base = N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past. - owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner() covers the full byte len, so a non-page-multiple non-final sg desyncs num_niovs from the gen_pool region for every later sg, on both RX and TX. dma-buf does not require page-aligned sizes, so the bind path has to enforce what its own indexing assumes. Reject both with -EINVAL. The size check is TX-only (only tx_vec is sized off dmabuf->size); the SG-length check covers both directions. | ||||
| CVE-2026-64123 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: defer node table free until after RCU readers HSR node-list and node-status generic-netlink operations run under rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table with plain list_del() and frees each node immediately. That lets a generic-netlink reader hold a struct hsr_node pointer across hsr_dellink(). In a KASAN build, widening the reader window after hsr_get_next_node() obtains the node reproduces a slab-use-after-free when the reader copies node->macaddress_A; the freeing stack is hsr_del_nodes() from hsr_dellink(). Use list_del_rcu() and defer the free through the existing hsr_free_node_rcu() callback. This matches the lifetime rule used by the HSR prune paths, which already delete nodes with list_del_rcu() and call_rcu(). | ||||
| CVE-2026-64122 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after mlx5e_safe_reopen_channels() has torn down and freed the channel (and its embedded SQs). Replace the three sq->netdev references with priv->netdev which is safe because priv outlives channel teardown. The netdev_err() call already used priv->netdev for this reason; make the trylock/unlock and health_channel_eq_recover calls consistent. This fixes the following KASAN splat: BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277 Call Trace: mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] devlink_health_reporter_recover+0xa2/0x150 devlink_health_report+0x254/0x7c0 mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core] mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core] process_one_work+0x677/0xf20 worker_thread+0x51f/0xd90 kthread+0x3a5/0x810 ret_from_fork+0x208/0x400 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-64118 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: qed: fix double free in qed_cxt_tables_alloc() If one of the later PF or VF CID bitmap allocations fails, qed_cid_map_alloc() jumps to cid_map_fail and frees the previously allocated CID bitmaps before returning an error. qed_cxt_tables_alloc() then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free() again. Fix this by setting each CID bitmap pointer to NULL after bitmap_free() to avoid double free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime reproduction was not attempted because exercising the failing allocation path requires device-specific setup. | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||