Export limit exceeded: 370450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370450 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-15641 | 1 Devolutions | 1 Server | 2026-07-25 | 7.1 High |
| Improper authorization in the access request status endpoint in Devolutions Server 2026.2.11, 2026.1.22 allows an authenticated low-privileged user to approve their own pending access request via a direct call to the request status endpoint, bypassing the required approver review. | ||||
| CVE-2026-15058 | 1 Devolutions | 1 Server | 2026-07-25 | 3.1 Low |
| Improper authorization in the secure messages deletion endpoint in Devolutions Server 2026.2.11, 2026.1.22 allows an authenticated user to delete another user's messages via a direct object reference to the message identifier. | ||||
| CVE-2026-64529 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - remove unused character device and IOCTLs The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst. | ||||
| CVE-2026-64528 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions. | ||||
| CVE-2026-64527 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate VMBus packet size in receive callback hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one of four message-type branches without knowing how many bytes the host wrote into hv->recv_buf. The completion path then runs memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that wakes on wait_for_completion_timeout() can read up to 16 KiB of residue from a prior message as if it were the response payload. Pass bytes_recvd into hyperv_receive_sub() and reject any packet that does not cover the pipe + synthvid header. A single switch on msg->vid_hdr.type then computes the type-specific payload size: the three completion-driving types (SYNTHVID_VERSION_RESPONSE, SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through to a shared exit that requires that size before memcpy/complete, while SYNTHVID_FEATURE_CHANGE validates its own payload and returns before reading is_dirt_needed. Unknown types are dropped. SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT array. Validate the fixed prefix first so resolution_count can be read, bound it against the array, then require only the count-sized array, so the shorter responses the host actually sends are accepted. Only run the sub-handler when vmbus_recvpacket() returned success. The memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead reports the required length, which can exceed hv->recv_buf, so copying bytes_recvd would read and write past the 16 KiB buffers. Gating on the success return keeps the copy bounded. The nonzero-return path is itself a malformed-message case and is now logged rather than silently skipped; channel recovery is not attempted. Rejected packets are reported via drm_err_ratelimited() rather than silently dropped, matching the CoCo-hardened pattern in hv_kvp_onchannelcallback(). | ||||
| CVE-2026-64526 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsconfig: fix missing ethnl_ops_complete() tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call ethnl_ops_complete() before returning the error. | ||||
| CVE-2026-64525 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit The struct pernet_operations docstring in include/net/net_namespace.h explicitly warns against blocking RCU primitives in .exit handlers: Exit methods using blocking RCU primitives, such as synchronize_rcu(), should be implemented via exit_batch. [...] Please, avoid synchronize_rcu() at all, where it's possible. Note that a combination of pre_exit() and exit() can be used, since a synchronize_rcu() is guaranteed between the calls. xfrm_policy_fini() violates this: it calls synchronize_rcu() before freeing the policy_bydst hash tables (so no RCU reader is mid- traversal at free time), but runs from xfrm_net_ops.exit -- once per namespace -- so a cleanup_net() of N namespaces pays N full RCU grace periods serially. Use the documented pre_exit/exit split. Move the policy flush (and the workqueue drains it depends on) into a new .pre_exit handler; xfrm_policy_fini() then runs in .exit and frees the hash tables after the synchronize_rcu_expedited() that cleanup_net() guarantees between the two phases. Providing O(1) RCU grace periods per batch instead of O(N). Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET) at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and __put_net counts were balanced, ruling out a refcount leak. | ||||
| CVE-2026-64524 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate resolution_count and fix WIN8 fallback A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the parse loop. Bound resolution_count against the array size, folded into the existing zero-check. When the WIN10 resolution probe fails, the caller in hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated, which sets mode_config.max_width / max_height to 0 and makes drm_internal_framebuffer_create() reject every userspace framebuffer with -EINVAL. The pre-WIN10 branch had the same gap for preferred_width / preferred_height. Use a single post-probe fallback guarded by screen_width_max == 0 so both paths converge on the WIN8 defaults. | ||||
| CVE-2026-64523 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Take a long-lived file reference at submit handshake_nl_accept_doit() needs the file pointer backing req->hr_sk->sk_socket to survive the window between handshake_req_next() and the subsequent FD_PREPARE() and get_file(). The submit-side sock_hold() does not provide that. sk_refcnt keeps struct sock alive, but struct socket is owned by sock->file: when the consumer fputs the last file reference, sock_release() tears the socket down regardless of any sock_hold. Add an hr_file pointer to struct handshake_req and acquire an explicit reference on sock->file during handshake_req_submit(). handshake_complete() and handshake_req_cancel() release the reference on the completion-bit-winning path. The submit error path must also release the file reference, but after rhashtable insertion a concurrent handshake_req_cancel() can discover the request and race the error path. Gate the error-path cleanup -- sk_destruct restoration, fput, and request destruction -- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same serialization handshake_complete() and handshake_req_cancel() already use. When cancel has already claimed ownership, the submit error path returns without touching the request; socket teardown handles final destruction. The accept-side dereferences are not yet retargeted; that change comes in the next patch. | ||||
| CVE-2026-64522 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating software state and skipping hardware offload setup. That path jumps to the common success label before taking the eswitch mode block. After tunnel-mode validation was moved earlier, the common success label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs, this decrements esw->offloads.num_block_mode without a matching increment. Return directly after installing the acquire SA offload handle, so only the paths that successfully called mlx5_eswitch_block_mode() call the matching unblock. | ||||
| CVE-2026-64521 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: meson: amlogic-a4: fix deadlock issue Accessing the pinconf-pins sysfs node may deadlock. pinconf_pins_show() holds pctldev->mutex, and the platform driver calls pinctrl_find_gpio_range_from_pin(), which tries to acquire the same mutex again, leading to a deadlock. Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue. | ||||
| CVE-2026-64520 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies The register-based PARTITION_INFO_GET path trusted the firmware-provided indices when copying partition descriptors into the caller buffer. Reject inconsistent counts or index progressions so the copy loop cannot write past the allocated array. (fixed cur_idx when exactly one descriptor in the first fragment) | ||||
| CVE-2026-64519 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix infinite loop in layout state revocation find_one_sb_stid() skips stids whose sc_status is non-zero, but the SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status before calling nfsd4_close_layout(). The retry loop therefore finds the same layout stid on every iteration, hanging the revoker indefinitely. | ||||
| CVE-2026-64518 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix out-of-bounds access for twsk in tcp_ao_established_key(). lockdep_sock_is_held() was added in tcp_ao_established_key() by the cited commit. It can be called from tcp_v[46]_timewait_ack() with twsk. Since it does not have sk->sk_lock, the lockdep annotation results in out-of-bound access. $ pahole -C tcp_timewait_sock vmlinux | grep size /* size: 288, cachelines: 5, members: 8 */ $ pahole -C sock vmlinux | grep sk_lock socket_lock_t sk_lock; /* 440 192 */ Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT. | ||||
| CVE-2026-64517 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/gsc: Fix double-free of managed BO in error path The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO allocated with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm cleanup action registered, this causes a double-free when devm unwinds during probe failure. Remove the explicit free and let devm handle it, consistent with all other xe_managed_bo_create_pin_map() callers. (cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) | ||||
| CVE-2026-64516 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets The VCPU BO contains the actual FW at an offset, but it was not calculated into the VCPU BO size. Subtract this from the FW size to make sure there is no out of bounds access. Make sure the stack and data offsets are aligned to the 32K TLB size. Check that the FW microcode actually fits in the space that is reserved for it. (cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) | ||||
| CVE-2026-64515 | 1 Linux | 1 Linux Kernel | 2026-07-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix MLE defragmentation If either reconf or EPCS multi-link element (MLE) is contained in a non-transmitted profile, the defragmentation routine is called with a pointer to the defragmented copy, but the original elements. This is incorrect for two reasons: - if the original defragmentation was needed, it will not find the correct data - if the original frame is at a higher address, the parsing will potentially overrun the heap data (though given the layout of the buffers, only into the new defragmentation buffer, and then it has to stop and fail once that's filled with copied data. Fix it by tracking the container along with the pointer and in doing so also unify the two almost identical defragmentation routines. | ||||
| CVE-2026-15410 | 1 Sonicwall | 1 Sma1000 | 2026-07-25 | 7.2 High |
| Post-authentication improper control of generation of code ('Code Injection') vulnerability has been identified in the SMA1000 Appliance Management Console (AMC) which in specific conditions could potentially enable a remote authenticated attacker as administrator to execute arbitrary OS commands. | ||||
| CVE-2026-47478 | 1 Nvidia | 1 Triton Inference Server | 2026-07-25 | 7.5 High |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause the use of an expired file descriptor. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2026-47480 | 1 Nvidia | 1 Triton Inference Server | 2026-07-25 | 7.5 High |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause an uncaught exception. A successful exploit of this vulnerability might lead to denial of service. | ||||